Filter by Custom Post Type

Check this: ConsumerAutomotiveMedicalEngineeringFashionJewelleryToolingMouldingSoftwareMetalPlasticResin

ProtoCAM Launches Instant Quoting Tool For 3D Printed Parts

ProtoCAM, a 3D printing service bureau based in Pennsylvania, has launched a new instant quoting tool for customers. The quoting tool will allow ProtoCAM customers to gain immediate pricing information prior to placing their order for 3D printed parts. When […]

SASTRA Gets Government Order Of 100 3-D Printed Ventilator Splits For COVID-19 Patients

Further, he said the splits have been given to AIIMS, New Delhi, for testing. The AICTE has sent instructions to all engineering colleges having 3D printer facilities to be part of this initiative. The Government Rajiv Gandhi hospital in Chennai […]

SLM Solutions To Raise $66 Million In Elliott-Backed Convertible Bond

German 3D printing specialist SLM Solutions, whose top shareholder is activist fund Elliott, plans to raise 60 million euros ($66 million) in financing via a three-tranched convertible bond, it said on Friday. The bond is fully backstopped by Elliott, which […]

Coronavirus Pandemic | Startups 3D Print Ventilator Parts, Visors To Bridge Shortfall

Indian startups working with hospitals, doctors to 3D print products and components that can help in capacity expansion for healthcare professionals A ventilator is what stands between life and death as coronavirus tightens its grip over the world, with infections […]

3D-Printing Firm Releases Hands-Free Door Opener Design For Free

The coronavirus persists longest on hard surfaces such as stainless steel and plastic. A new study co-authored by the National Institute of Allergy and Infectious Diseases in the US found that, on such surfaces, “viable virus could be detected up […]

Joint Industry Programme on Additive Manufacturing for Marine Parts

The Maritime and Port Authority of Singapore (MPA), National Additive Manufacturing Innovation Cluster Singapore (NAMIC), and Singapore Shipping Association (SSA) have launched the Phase 2 of the Joint Industry Programme (JIP) on Additive Manufacturing for Marine Parts. The overall challenge statement […]

BOTT 1000 Morlaco: A Superbike Built With 3D Printed Components

The BOTT 1000 Morlaco is the one of the first superbikes to have its body and other components produced with 3D printing technology. This superbike was developed by Bottpower, a Spanish high-tech motorsport engineering company located in Valencia. The company […]

Evonik launched 3D Printing software for process and materials selection

German specialty chemicals company Evonik has launched its first software tool for 3D printing. The application is designed to assist manufacturers in selecting the appropriate additive manufacturing process for their desired part, depending on geometry, material and financial analysis of […]

Titomic Signs Multi-Million-Dollar Contract With Defence Product Manufacturer

Titomic will receive $25.5 million by providing two Kinetic Fusion systems for industrial-scale metal additive manufacturing. Additive manufacturing company Titomic (ASX: TTT) has come out of a trading halt to reveal a binding agreement with Australian research and development company […]

Audi and trinckle develop in-house design software for 3D printing tools

Audi has revealed more about its use of 3D printing. A team of 3D printing specialists at Audi’s Böllinger Höfe facility is working with Berlin-based software company trinckle to develop a software platform for designing tools. The goal of the […]

Australian Army extends world-first 3D printing trial

Defence Industry Minister Melissa Price has confirmed that a cutting-edge 3D printing technology developed in Darwin and initially used by the Royal Australian Navy will now be rolled out and used by the Australian Army. The partnership between Defence, Melbourne […]

SME Announces Insights on AM for Investors at RAPID + TCT 2020

SME and the TCT Group, the producers of RAPID + TCT, North America’s largest and most influential additive manufacturing event, announced today an exclusive dinner for investors at RAPID + TCT 2020, conducted by Wohlers Associates, Inc. The Wohlers Associates Investor Dinner sponsored by […]

nScrypt Microdispenses 50µm Dots for 3D Printed Electronics

Orlando, Fl-based nScrypt is meeting the challenge of flexible hybrid electronics (FHE) and 3D printed electronics by precision microdispensing solder and adhesive dots with volumetric control, in the 50 micron range. Microdispensing is an additive method of dispensing pastes, inks, […]

Daimler Buses identifies 200 interior spare parts for 3D Printing

Daimler Buses has now announced the next step in spare parts supply using 3D printing: At the end of 2020 these will be manufactured directly in BusWorld Home and customized in accordance with customer requirements. Thus, Daimler’s bus division can […]

AIIMS introduces 3D printing technology for jaw joint replacement

The All India Institute of Medical Sciences (AIIMS) has introduced a cutting-edge 3D printing technology for jaw joint replacements to acquire accuracy in such procedures. At a three-day workshop the 2nd AIIMS Total TMJ Replacements Workshop, 2020, being is held […]

A new volumetric 3D-printing technique using light

Researchers at the École polytechnique fédérale de Lausanne (EPFL) in Switzerland have developed a new method to create small soft objects using a laser and a liquid photo-sensitive polymer. Christened volumetric 3D-printing, the technique, which is particularly rapid, has potential […]

UAE Hospital performs Cervical Spine Surgery Using 3D Printing

In a breakthrough development, RAK Hospital in Ras Al Khaimah has become the first hospital in the UAE to perform cervical spine surgery using the 3D printed model on a patient suffering from damaged cervical spine. The new kid on […]

Wilhelmsen completes landmark delivery of 3D Printed Parts for Maritime

Global maritime industry group Wilhelmsen has delivered a number of 3D printed parts to dry bulk shipping company Berge Bulk. Slated as a “landmark commercial delivery” by Wilhelmsen, the components included a set of 3D printed scupper plugs, delivered as […]

Arevo announces MaaS for 3D-printed composites

Arevo, the Silicon Valley company transforming composites manufacturing through digitalization, will unveil its new MaaS (Manufacturing-as-a-Service) program for the on-demand production of ultra-strong, lightweight 3D-printed composite parts at the forthcoming JEC World show in Paris. “In addition to its availability […]

Pratt & Whitney uses 3D printing for aero-engine component

Pratt & Whitney, a division of United Technologies Corp, revealed the industrialisation of the use of 3D-printing for an aero-engine component – a first in the maintenance, repair and overhaul (MRO) of commercial engines. The 3D-printed part is projected to […]

Polymer-based, 3D-printed pericardial tissue project could save countless lives

A new three-year research project is developing biomimetic polymers that can imitate the mechanical properties of pericardial tissue, with the goal of making artificially produced implants for heart disease patients who are waiting for a donor organ. It can be […]

Collins Aerospace advances Singapore Innovation Hub

Collins Aerospace Systems, a unit of United Technologies Corp., is taking a bold step forward in digitally transforming MRO operations with the opening of its Singapore Innovation Hub, a new 10,000 square foot facility unveiled today at 39 Changi N […]

RIZE and Sindoh announce strategic partnership

At 3DEXPERIENCE World , RIZE, Inc., a next-generation additive manufacturing company dedicated to providing safe industrial 3D printing to all users, announced that the company has entered into a strategic partnership with Sindoh Co., Ltd, a multi-function printer and 3D printer manufacturer based in South […]

Mapal introduces metal 3D-printed bell cutting tools

Mapal has developed 3D-printed bell tools with brazed PCD inserts, which helps reduce the weight of the tools without affecting their strength and integrity. Produced using the selective laser melting process, the tools feature a modified internal design of a […]

Markforged achieves ISO 27001 certification

Markforged, a provider of metal and carbon fiber 3D printers, has announced it is the first 3D printing systems manufacturer to achieve ISO 27001 certification. The certification includes the company’s Eiger cloud additive manufacturing platform, 3D printing hardware, fleet management […]

DNV GL to host Workshop in Mumbai on Adoption of 3D Printing in Maritime

DNV GL to host their 1st workshop in Mumbai on Adoption of 3D Printing in Maritime, Offshore and Oil & Gas Industries on 12th February 2020. This course will provide the participants with background, knowledge and understanding of the AM benefits […]

SmithsHP, Burloak Technology Team Up to Supply 3D-Printed Parts for F1 Racecars

Smiths High Performance and Burloak Technologies announced in late January that they have signed an exclusive agreement to supply 3D-printed parts in metals and polymers to the worldwide Formula 1 racing market. Birmingham, U.K.-based SHP is an international stockholder and […]

US Army Eyes Full Operational Capability for Illinois 3D Printing Facility by 2021

The US Army plans to continue operations at its new additive manufacturing hub at Rock Island Arsenal, Ill., ahead of the facility’s certification for full operating capability in 2021, National Defense Magazine reported Tuesday. The Army also wants to perform […]

Speakers offered at IKEA Speakers can be customised using 3D Printing

Swedish audio tech company Teenage Engineering designed the Frekvens collection for IKEA, which includes portable speakers and LED spotlights that react to sound. It also features a tripod stand that the speakers and lights can attach to, so you can […]

ASTM is developing a standard for laser powder bed fusion

Global standards developer ASTM International has announced that the F42 additive manufacturing technologies committee is currently developing a standard for the laser powder bed fusion (LPBF) 3D printing process. The standard has the potential to help quickly assess the quality […]

Structo and pro3dure announce collaboration to expand offering to dental industry

Structo, a dental 3D printing solutions provider and the manufacturer behind Velox – the world’s first all-in-one 3D printer – today announced a partnership with German 3D printing materials company, pro3dure. This partnership will see Velox users gain access to […]

Max Hospital collaborates with Anatomiz3D to setup 3D Printing Lab

Anatomiz3D Medtech Pvt. Ltd, a ‘patient-specific’​ solution provider to the healthcare industry, utilizing Design, 3D Printing and Bioprinting technologies has collaborated with one of India’s leading healthcare providers in the country, Max Healthcare to set up a Medical 3D printing lab at […]

CSIR-CSIO transfers 3D Printed medical implants technology to Industry

CSIR-Central Scientific Instruments Organisation (CSIR-CSIO) has transferred the knowhow of “3D Printed Patient Specific Medical Implants” to the industry. The requirement of such implants may arise due to trauma, diseases like cancer or fungal infection and revision surgeries Patient Specific […]

Temasek’s Accuron Technologies takes stake in UK additive manufacturing startup

Temasek owned Accuron Technologies on Tuesday said it has invested in a UK-based additive manufacturing startup, taking a more than 20 per cent stake in the company it thinks could “transform manufacturing”. Accuron declined to reveal the amount it invested in the startup, […]

Nanoscribe develops 3D printing material for biocompatible microstructures

Additive micro-fabrication specialist Nanoscribe GmbH has developed a new 3D printing material designed for the creation of biocompatible 3D microstructures for tissue engineering. The new IP-Visio material is said to open up life science applications in the production of intricate, filigree micro-environments, […]

NIOSH announces partnership aimed at enhancing safety and health in 3D printing

NIOSH is teaming up with nonprofit organization America Makes in an effort to advance workplace safety and health in 3D printing and additive manufacturing. The agency defines additive manufacturing as “the process of taking a design created in software or […]

How 3D Printing Can Help Athletes Heal From Injuries

The NFL awarded 3D printing company Protect3d with the top prize of $50,000 at the league’s 1st and Future pitch competition two days before Super Bowl LIV in Miami. Protect3d won first place out of four startups that made presentations […]

Dubai looks to drive 3D Printed Healthcare Industry

Dubai Health Authority has opened a 3D Printing Lab in its Innovation Centre that will provide medical professionals at DHA with patient specific anatomical models, allowing them to conduct detailed pre-operative analysis and to improve patient communication at DHA’s hospitals […]

A new copper-titanium alloy enables 3D printing

Collaboration between researchers at the RMIT, CSIRO, University of Queensland, Ohio State University report a new titanium alloy that incorporates copper. Titanium has excellent corrosion resistance and the highest strength-to-density ratio of any metallic element. It can be combined with […]

DEWA uses 3D-printing solutions to produce spare parts

The Dubai Future Council on Energy reviewed the efforts of the Mohammed bin Rashid Al Maktoum Solar Park (MBR Solar Park) R&D Centre and the Dubai Electricity and Water Authority (DEWA) during the fourth meeting of the Dubai Future Council […]

Ford and EOS develop locking wheel nuts with biometric signature

Ford says it has developed a 3D-printed locking wheel nut made using a unique biometric signature based on the driver’s recorded voice in a bid to prevent wheel and tire thefts. Ford worked with industrial 3D printing supplier EOS to […]

DNV GL to provide certification for Aurora Labs unique metal printers.

Agreement formalises the scope of certification, training and audit services to be provided to Aurora Labs. Independent third-party certification will create improved access to mining, oil and gas, and marine and other markets for parts printed by A3D’s unique 3D […]

Italy’s largest AM service bureau plans expansion with SLM multi-laser technology

Italy’s largest additive manufacturing service bureau, expands its additive manufacturing activities and continues to rely on proven SLM® multi-laser technology. The Italian service provider signed a letter of intent to purchase 15 Selective Laser Melting machines from SLM Solutions within […]

How 3D printing and composite materials help streamlining SAE competition results

For the last four years of SAE competition, UVic Formula Motorsport team has been using 3D printed oil pans that were purposely engineered to be manufactured by CRP USA’s laser sintering 3d printing process and Windform® TOP-LINE composite materials.    […]

Intech Additive Solutions launches ‘Made in India’ Metal 3D Printers

Intech Additive Solutions Pvt. Ltd. (Formerly known as Intech DMLS Pvt. Ltd.), the Pioneers and Industry experts in Metal Additive Manufacturing in India, announced that they have Designed, Developed and Delivered to the Indian Manufacturing Industry a true ‘Made in India’ […]

Lawrence Livermore to officially open Advanced Manufacturing Laboratory.

Lawrence Livermore National Laboratory is offially opening the Advanced Manufacturing Laboratory (AML), a state-of-the-art collaborative facility situated in the recently expanded Livermore Valley Open Campus (LVOC). The $10 million, 14,000-square-foot AML is designed to merge LLNL’s science and engineering expertise […]

ABB enables 3D Printing for faster digital manufacturing

ABB is introducing 3D printing capabilities to its RobotStudio simulation and offline programming software, which will enable users to program ABB robots for additive manufacturing in just 30 minutes. Part of the PowerPac portfolio of RobotStudio, the new 3D Printing […]

Zortrax announces the launch of their a 3D printing service

Zortrax has announced the launch of a 3D printing service which harnesses the company’s entire product portfolio. It will allow customers who want to adopt 3D printing but who can’t justify acquiring a machine and using it in-house to access […]

NTU and HP inaugurate Corporate Lab to Advance Digital Manufacturing

Nanyang Technological University (NTU) Singapore, HP and the National Research Foundation Singapore (NRF) joined forces to advance AM in 2018. On January 2019, the partners inaugrated the HP-NTU Digital Manufacturing Corporate Lab by showcasing digital manufacturing technologies that  will improve the […]

3D Printing helps in complex orthopaedic surgeries

Accidents are very unfortunate. Such an unfortunate incident happened with 14 yr old, Aaska Shah on 3rd Dec 2019. She fractured her left hand’s elbow while playing. The x-ray scan shows multiple fractures which made the case quite complicated. The […]

BAE Systems aims to reduce cost & increase speed of combat aircraft manufacture through Renishaw 3D printing partnership

BAE Systems is to work with Renishaw in a bid to develop additive manufacturing capability that will reduce the cost and increase the speed of manufacturing future combat aircraft. A Memorandum of Understanding signed by both companies has set a framework to ‘maximise […]

3D Printing Truck Parts Improves Manufacturing Process

VOLVO TRUCKS 3D printing has made massive strides in the last decade and some firms in the transportation industry, such as Volvo, have fully embraced it. Aside from improvements in 3D printing that slash prototyping costs and expedite logistics, external […]

Will 3D printed SuperDraco engines stand up to Crew Dragon’s launch escape test?

Before it can conduct manned missions to the ISS, the Moon, Mars and Beyond, SpaceX has to prove that its Crew Dragon capsule has what it takes to keep astronauts safe during the flight. One last key hurdle in this […]

Thor3D partners with Zbrush to offer a bundle for digital sculptors, artists, game and product designers.

Thor3D announces that it partners with Pixologic to bring a bundle for digital artists, game and product designers, who can cut costs and speed up their workflow with Calibry 3D scanner.  The bundle is available for sale through Thor3D local […]

CRP Technology launches Windform® P2, thermoplastic glass fiber filled material for HSS technology

CRP Technology, a leading company in the creation of prototypes and final applications in professional 3D printing, launches Windform® P2 material. Windform® P2 is a glass fiber reinforced thermoplastic polyamide material with excellent mechanical properties for High Speed Sintering process. […]

ENERZI develops India’s First Binderjet Printer

ENERZI develops India’s First Binderjet Printer with Processing Furnace for Metals, Ceramics, Polymers and Composite powder materials. Enerzi Microwave Systems Pvt. Ltd. is a technology company based out of Belagavi, India. ENERZI has been innovating cutting edge material processing systems, […]

Evolve Additive CEO says 3D printing industry “has been waiting for something like STEP”

If there was one message that summed up the current mind-set of the additive manufacturing industry at this year’s Formnext, it was perhaps best said by Evolve Additive CEO, Steve Chillscyzn during a press conference on the company’s new STEP (Selective Thermoplastic Electrophotographic […]

A 3D Resin Printer that you can Create yourself with your Smartphone

LumiBee is a unique mini 3D resin printer that uses smartphone as a light source to polymerize the resin. The project is free for everyone who wants to create their own device at home. To create it, all you need […]

Wipro 3D launches addwizeTM – An Additive Technology Adoption and Acceleration Program

Wipro3D, the additive manufacturing (AM) business of Wipro Infrastructure Engineering (WIN) has launched an Additive Technology Adoption and Acceleration Program termed Addwize.TM The objective of the program is to enable organizations and institutions to systematically adopt and scale the usage […]

India’s first Electron Beam based metal 3D printer launched.

In a first, Wipro3D, the additive manufacturing (AM) business of Wipro Infrastructure Engineering (WIN) and the prestigious Indian Institute of Science, Bangalore (IISC) have developed an industry grade indigenous metal Additive Manufacturing machine.  India’s first metal 3d printing machine, works […]

Shree Rapid Technologies to launch new material for 3D Systems’ Figure 4® at Amtech 2019

Figure 4® is Productive and cost-effective digital molding solutions for production environments which assures Six Sigma quality and repeatability. The modular approach to precise parts manufacturing, which is made possible by Figure 4® technology, a 30-year-old stereolithography (SLA) configuration. Automated […]

Carpenter Technology Opens Emerging Technology Center to Offer End-to-End Future Tech Additive Manufacturing Capabilities

Carpenter Technology Corporation announced the grand opening of its Emerging Technology Center (ETC) in Athens, Alabama. Carpenter Technology’s 500,000-square-foot ETC is North America’s newest additive manufacturing (AM) facility containing true end-to-end capabilities. The ETC provides the capability to atomize a […]

SLM Solutions and Honeywell Partner to Qualify New AM Technology to Reduce Printing Times

SLM Solutions announced today that it is working with Honeywell, a leading user of additive manufacturing technologies with extensive knowledge across various platforms and applications, to help qualify new additive manufacturing parameters that enable printing at increased thicknesses. The partnership […]

How 3D printing and composite materials help streamlining SAE competition results

For the last four years of SAE competition, UVic Formula Motorsport team has been using 3D printed oil pans that were purposely engineered to be manufactured by CRP USA’s laser sintering 3d printing process and Windform® TOP-LINE composite materials.    […]

CSIR Labs from across India to showcase their research at AMTech

CSIR Labs from across India will be showcasing their work and research at AMTech 2019 as a part of a special initiative by the organisers – Indian 3D Printing Network to build a strong indigenous ecosystem for the Indian Additive […]

Award winning Made in India Composited 3D Printing to be showcased at AMTech

Incorporated in 2015, Fabheads Automation has developed in-house patented additive manufacturing technologies. Fabheads’ FibrBots are India’s first and only 3D printers with the continuous fiber 3D printing capability. They will showcase their award winning Made in India Composited 3D Printing […]

Hamilton Labs and Laticrete Look to the Future with Concrete 3D Printing

Laticrete, a manufacturer of construction materials, having developed several 3D printing mortars for projects globally, have localized the material for Hamilton Labs’ project in India. On- site calibration and laboratory testing utilizing local Indian raw materials has created a tailored […]

NASA buys third nScrypt Factory in a Tool to 3D print conductive materials

NASA has selected nScrypt’s 3Dn tabletop Factory in a Tool (FiT) for printing 3D print and 3D contour print silver and other conductive materials to support intelligent flight systems research at NASA’s Langley Research Center (LARC) in Hampton, Virginia. The system will […]

SPEE3D Metal 3D Printing Technology to be Deployed by the Royal Australian Navy

The Australian Government today announced a $1.5 million investment into a two-year pilot of SPEE3D technology for the Royal Australian Navy including the deployment of a WarpSPEE3D 3D metal printer. Cold spray 3D printing technology developed by the Darwin, Australia, based company […]

APWORKS helped Bugatti Chiron break record with 3D printed exhaust finishers

APWORKS, the Airbus-owned industrial 3D printing specialist, has revealed that it provided 3D printed exhaust finishers for the Bugatti Chiron, a hyper sports car that broke a world record when it reached 300 miles per hour (482.80 km/h) in August. […]

TRUMPF presented new 3D printer for medical devices at Formnext

German high-tech company TRUMPF unveiled a new 3D printer at Frankfurt’s Formnext, the leading international trade fair for additive manufacturing. Called TruPrint 2000, it lends itself to medical engineering and other applications with lofty standards and quality. TRUMPF experts revamped […]

Wipro 3D awarded Lloyd’s Register certification for Additive Manufacturing quality

Wipro 3D, the additive manufacturing (AM) business of Wipro has been awarded a Lloyd’s Register Certification for Additive Manufacturing (AM) quality. The certification is in accordance with the requirements of the LR-TWI Guidance Notes for theCertification of Metallic Parts made […]


Hamilton Labs, a division of Hamilton Holdings Pte Ltd based in Singapore, is known for taking on the toilet situation in India in response to the government’s Swachh Bharat Missions. Swachh Bharat Mission (SBM) is a nation-wide campaign in India for […]


Global standards organization ASTM International and TÜV SÜD, a German testing and certification organization, signed a Memorandum of Understanding (MOU) to develop programs aimed at speeding adoption of and trust in Additive Manufacturing (AM) technologies. This strategic partnership supports knowledge […]

Product designing to be revolutionized in auto sector by Additive Manufacturing Technology

3D Printing or Additive Manufacturing technology is making rapid strides in its applicability in the automotive industry in India and is going to revolutionize the way products are both designed and manufactured, the industry experts said at the third edition of ‘3D […]

3D Printing Service Provider Sculpteo acquired by BASF

To continue to expand its position as a leading service provider in the additive manufacturing sector, BASF New Business GmbH has formally agreed to acquire the online 3D printing service provider Sculpteo. The agreement was signed on November 14, 2019 […]

Siemens expands additive manufacturing portfolio through acquisition of Atlas 3D

Atlas 3D helps designers define optimal part orientations for ‘right first time’ 3D printing Cloud-based, GPU-accelerated Sunata™ software can reduce downstream 3D printing errors caused by thermal distortion up to one hundred times faster than other solutions on the market […]

Modix introduces Extra Large MAMA 3D Printer for heavy duty print heads

Modix a global developer of large format 3D printers has announced the launch of its new extra-large 3D printer, with variable print volume between 1 x 1 x 1 meter to 2 x 5 x 1 meter (XYZ). The printer, Modix […]

Jay Leno partners with Stratasys to 3D print custom parts for classic vehicle and supercar collection

Stratasys has announced it is collaborating with Big Dog Productions, the media production firm headed by North American comedian Jay Leno. The new partnership is an extension of Stratasys’ Performance Partner Program. As part of the program, Stratasys will be […]

Etihad Engineering receives region’s first approval to 3D print aircraft parts

Etihad Engineering, the industry-leading Maintenance, Repair and Overhaul (MRO) division of Etihad Aviation Group, has collaborated with EOS and BigRep, both leading 3D printing technology providers, to open the region’s first additive manufacturing facility with Design and Production Approval from […]

GKN Additive prepares distribution of AM powders for European market

GKN Additive has identified a high demand for in-stock material for additive manufacturing (AM) in Europe and now prepares to locally produce and warehouse powders through its GKN Additive Materials business segment. Potential customers often cannot forecast prototyping projects enough to allow […]

Admatec introduces the Admaflex 300 a high-volume ceramic and metal 3D printer

ADMATEC recently introduced the Admaflex 300 to the market, the world’s first flexible and open system for high volume ceramic and metal 3D printed parts. This 3D printer is designed to meet the production demands of its customers. The Admaflex 300 is […]

EOS demonstrates solutions for flexible, automated metal 3D printing

EOS is demonstrating its EOS Shared Modules periphery solution for integrated and efficient additive manufacturing (AM) with systems of the EOS M 400 series. The various modules plus transport systems and control center software enable users to implement the equipping, unpacking, […]

Formnext Preview: Indian Additive Manufacturing Industry footprint increases

2018 was a year of many firsts for the Indian Additive Manufacturing industry on the global stage and at Formnext, the largest congregation of the Additive Manufacturing ecosystem in the world. We had also shared our thought with a article […]

RIZE to offer Full-Color and Composite Industrial 3D Printer

RIZE, Inc., a Boston, USA-based, next-generation additive manufacturing company dedicated to bringing Industrial 3DPrinting to all, announced today that it has begun commercial shipments of its XRIZE™ industrial 3D printer. Purpose-built for an office or field environment, XRIZE empower users throughout […]

CEAD and Siemens intensify collaboration for industrial 3D printing of large fiber reinforced polymer parts

CEAD, technology supplier of 3D printing equipment on the frontier of large scale polymer, glass and carbon fibers 3D printing, and Siemens intensify their collaboration and showcase their latest development the AM Flexbot at the upcoming Formnext 2019, a leading […]

Imaginarium to showcase Rapid Online Factory at Formnext

Imaginarium is one of India’s leading advanced manufacturing company offering services like additive manufacturing, CNC machining, vacuum casting, injection moulding, forming, and more. Having served over fifty industries like engineering, automotive, foundry, jewellery, healthcare, and more, Imaginarium has established itself […]

COBOD announces fastest 3D construction printers.

COBOD International has already made several headlines this year with their new second generation printer, the BOD2, and is now releasing a new video of this highly successful 3D construction printer.  BOD2 is not only the fastest 3D construction printer […]

Objectify to reinforce its commitment to the European market

Objectify, India’s leading AM solution bureau with its commitment to the European market will participate at the Formnext 2019 expo and showcase how AM can be uniquely positioned in different industries. Scheduled to take place from November 19-22 at Frankfurt, […]

EOS and AMFG develop 3D Printer connectivity in MES Workflow Automation Software

EOS, a leading German 3D printer OEM, and UK-based software company AMFG, have announced a partnership to enable streaming and connectivity for EOS machines through AMFG’s Manufacturing Execution System (MES) software. The two companies established the partnership in response to […]

Airbus to 3D-Print Drones and Self-Driving Vehicles in New Venture

Airbus has signed a new deal to manufacture drones and self-driving cars with Local Motors Industries, a 3D-printing start-up in San Francisco. The two companies are joining forces to launch Neorizon, a venture which will build mobility and autonomy solutions. […]

Volkswagen Hits Key Milestone in Journey to Mass Production with HP Metal Jet

Last year Volkswagen selected HP Metal Jet, the world’s most advanced 3D printing technology for the high volume manufacturing of production-grade metal parts, as the foundation for its strategy to industrialize additive manufacturing with a multi-year design and production roadmap. With […]

VDMA AM to present industrial use of Additive Manufacturing at Formnext 2019

Formnext 2019 starts on 19th of November. When the leading international trade fair for additive production technologies opens its doors at the Frankfurt Exhibition Centre, the 150 member companies of the Additive Manufacturing Association (AG AM) in the VDMA will […]

First 3D-printed pressure equipment manufactured and certified by BASF

Additive manufacturing is a new manufacturing technology to produce parts which are used in both research and production plants at BASF. The goal is to use the new freedom of design to optimize components – and thus improve chemical processes. […]

Evonik develops two new copolyester powders for the growing 3D printing industry.

Evonik develops thermoplastic elastomers based on innovative copolyesters for powder-based 3D printing technologies The result of Evonik’s acquisition of Structured Polymers technology, these innovative, high-performance materials the existing portfolio of polyamide-based powder formulations. Customers now have an even broader spectrum […]

Relativity is using AI-Powered Robots to 3D Print Entire Rockets

Relativity Space may have the biggest metal 3D printers in the world, and they’re cranking out parts to reinvent the rocket industry here—and on Mars. For a factory where robots toil around the clock to build a rocket with almost […]

SAE International publishes first polymer AM specifications for aerospace industry

SAE International today released the first Additive Manufacturing (AM) Polymer specifications for the aerospace industry. AMS7100: Fuse Filament Fabrication Process and AMS7101: Material for Fused Filament Fabrication represent the first specifications released under the AMS-AM Additive Manufacturing Non-Metallic (AMS-AM-P) committee. […]

Alfa Romeo Racing and Quintus Partner to Optimise Automotive AM parts.

For Alfa Romeo Racing, operated by Sauber Motorsport AG, the competitive edge is crucial when it comes to technology, and now they have chosen Quintus Technologies as their Hot Isostatic Pressing (HIP) partner. With an investment in their own state-of-the-art […]

Sandvik invests in dedicated Titanium Powder Plant for Additive Manufacturing

About 150 people participated in the grand opening of highly automated titanium powder plant setup by Sandvik in Sandviken, Sweden, last week – including customers and other key stakeholders. With this investment, Sandvik has now closed the only material gap […]

ExOne collaborates with Global Tungsten to advance Tungsten Metal AM

The ExOne Company, the global leader in industrial sand and metal 3D printers using binder jetting technology, and Global Tungsten & Powders Corp., a global manufacturer of tungsten metal powders, have entered into a collaboration to advance tungsten-based metal 3D […]

Thor3D Selects Verisurf Software for Education Solution

  Thor3D announced, today, it will include Verisurf Software as part of its education solution offering.   The solution includes, 3D scanning, reverse engineering, measurement and inspection capabilities for the education market, including trade schools, certificate program institutions, and universities.  […]

3D printed two-storey structure unveiled by Dubai Municipality

Dubai Municipality (DM) unveiled the world’s largest 3D printed two-storey structure, entering the Guinness Book of World Records with the completion of the integrated 640m2 building project, which is 9.5m high. The project was completed by 3D printing onsite using […]

TÜV SÜD and thyssenkrupp Innovations to jointly develop APAC market for AM

The Singapore arm of the German safety and quality expert, TÜV SÜD, has signed a Memorandum of Understanding (MoU) with thyssenkrupp Innovations, an innovative additive manufacturing solutions provider, to establish the principles governing their cooperation in jointly developing the market […]

Shree Rapid Technologies inaugurates Metal AM Customer Innovation Center

Shree Rapid Technologies inaugurated its second Customer Innovation Center dedicated to Metal Additive Manufacturing, having installed the first DMP Flex 350 in India. DMP is developed from the outcome of nearly half-a-million metal prints, offers fast build turnaround times in […]

Trumpf to present an automated mass 3D printing solution at Formnext

Trumpf is set to present a new solution that automatically changes substrate plates on the TruPrint 1000 3D printer. The high-tech company intends to unveil it at Frankfurt’s Formnext, the world’s leading trade show for additive manufacturing. A function Trumpf […]

Kennametal manufacturers Lightweight Stator Bore Tool for EV manufacturing using AM.

Kennametal has developed a 3D printed stator bore tool specifically designed to meet growing customer demand for lighter weight tooling solutions used to machine components for hybrid and electric vehicles. E-mobility components are typically machined on smaller, low horsepower CNC […]

Conference AM4I focuses on industrial application of additive processes

VDMA working group Additive Manufacturing with new technical conference AM4I – Additive Manufacturing for Industry  Focus on application of additive manufacturing (AM) in mechanical and plant engineering and other industries. Conference on 26/27 May 2020 in Ludwigsburg offers first-hand technical […]

STPL3D is making their mark in 3D Printed Displays

Manufacturers are increasing their reliance on 3D printing as part of their broader manufacturing strategies. A relatively young 3D printing company STPL3D is taking the challenge head-on. STPL3D has created many phenomenal 3D printed sculptures for its clients across the […]

EOS GmbH appoints Marie Langer as the new CEO

EOS, the world’s leading technology supplier in the field of industrial 3D printing of metals and polymers, is restructuring its company management with immediate effect. In doing so, the owner family underscores its long-term commitment, while at the same time […]

3D MicroPrint use the FT4 Powder Rheometer to push AM to its limits

3D MicroPrint GmbH (Chemnitz, Germany), a company pioneering the use of Additive Manufacturing (AM) to produce complex, micro-scale metal parts, is using the FT4 Powder Rheometer® from Freeman Technology (Tewkesbury, UK) to identify ultra-fine powders that will process efficiently. The […]

TRUMPF offers sustainable production process for heat-resistant materials

At EMO Hannover, the world’s leading metalworking trade fair, TRUMPF demonstrated how 3D printing is improving manufacturing processes for heat-resistant materials. These materials often consist of the nickel-based alloy Inconel®, which can withstand temperatures of up to 1,000 degrees Celsius […]

Stratasys Introduces Digital Anatomy 3D Printer for Functional Anatomical Models

Stratasys Ltd is further extending its commitment to the medical industry with the new J750™ Digital Anatomy ™ 3D Printer. Designed to replicate the feel, responsiveness, and biomechanics of human anatomy in medical models – the system improves surgical preparedness […]

India’s first additive manufacturing industry report launched

The India AM Report has been conceptualised to provide a credible reference point for the manufacturing industry and international companies, looking to invest in the Indian additive manufacturing landscape. This 1st edition of the India AM Report maps the growing […]

Markforged adds Inconel 625 for Metal X Additive Manufacturing system

Markforged, Watertown, Massachusetts, USA, has added Inconel 625 to the range of materials suitable for use with its Metal X Additive Manufacturing system. The alloy is highly resistant to corrosion and high temperatures, and is commonly used for applications in harsh […]

Omni3D in the finals of the international competition “Innovation to Company”

This year’s edition of the competition announced five different tasks directed, among others to startups. Their goal is to find the best ideas and innovations for existing companies with an established position on the market. Omni3D accepted the challenge of […]

First UL 2904 Greenguard Certification accorded to RIZE One™ Industrial 3D Printer

RIZE, Inc., a next-generation additive manufacturing company dedicated to sustainable and inclusive innovation, announced that it became the first in the 3D printing industry to receive UL 2904 GREENGUARD Certification with its RIZE One Industrial 3DPrinter, as well as its […]

Zortrax introduces Endureal, its 3rd generation industrial 3D printer

Zortrax, the world-renowned developer of 3D printing solutions, is entering a new segment. Its latest device, the Zortrax Endureal, will be launched at the TCT Show 2019 in Birmingham.  This 3rd generation 3D printer is designed for industry and production […]

Vertico 3D prints concrete footbridge in partnership with University of Ghent

Vertico, a Dutch firm that has developed a concrete 3D printing technology, recently demonstrated its capabilities by 3D printing a concrete footbridge in collaboration with the University of Ghent. Not only a feat for its concrete AM technology, the bridge […]

BeAM and Siemens intensifying collaboration in industrial 3D printing for DED

BeAM, a leading machine manufacturer in the field of DED (Directed Energy Deposition) technology for additive manufacturing, and the global technology company Siemens announced at EMO 2019 their plans to further intensify their already successful collaboration. This is based on […]

Education focused E2 3D printer to be launched by Raise 3D

3D printer manufacturer, Raise3D is preparing to launch its latest machine at TCT Show in Birmingham next week. The E2 is said to be an easy to use, industrial-grade 3D printer and marks the launch of a new line of open, multi-purpose machines aimed […]

Lamborghini’s new cutomizable Sián FKP37 features 3D printed parts

Lamborghini is an adopter of 3D printing – that is known. The company has been using the technology for prototyping for several years, although this was never officially confirmed beyond a Lamborghini placed inside the Energy Group (an Italian Stratasys distributor) booth […]

2019 MSC User Conference provides insight into future of design, simulation and manufacturing

More than 1200 customers and partners attended our annual 2019 MSC User Conference series in the Indo-Pacific region, hearing from industrial leaders and innovators about the role of data in creating an autonomous future. As always with the MSC User […]

NASA Nebraska launches open innovation competition using Copper3D’s antimicrobial 3D nanocomposite for the design of medical devices and tools suitable for space, in conjunction with UNMC, UNO, and 3D LifePrints

Mankind is accelerating its exploration of space and the universe at an increasingly rapid pace. Manned habitations such as the International Space Station (ISS) have been in existence for over 20 years. We are on the cusp of starting to […]

BEML announces strategic partnership with Wipro Infrastructure Engineering

State-owned BEML and Wipro Infrastructure Engineering have signed a pact to work together in aerospace, industrial automation, 3D printing, artificial intelligence and hydraulic system engineering. It is the first-of-its-kind memorandum of understanding for Wipro Infrastructure Engineering with a large public […]

GE Additive opens new 40,000 sqm facility in Lichtenfels, Germany

GE Additive is inaugurating a new 40,000-square-meter campus in Lichtenfels, Germany, which will become the new official home for GE Additive Concept Laser. The new Bavarian facility, called GE Additive Lichtenfels, will help the additive manufacturing specialist to meet growing customer […]

MIT researchers develop multimaterial fiber “ink” for 3D printed devices

A new method developed by MIT researchers uses standard 3-D printers to produce functioning devices with the electronics already embedded inside. The devices are made of fibers containing multiple interconnected materials, which can light up, sense their surroundings, store energy, […]

threeASFOUR showcases collective’s boundary-pushing designs created using 3D printing

Since its founding in 2005, fashion label threeASFOUR has remained at the forefront of avant garde fashion. For the past few years, the collective’s boundary-pushing designs have often overlapped with cutting-edge 3D printing practices, making for some of the fashion-tech world’s […]

Sandvik creates first 3D printed diamond composite

Sandvik Additive Manufacturing has created the first ever 3D printed diamond composite. While this diamond does not sparkle, it is perfect for a wide range of industrial uses. The new process means that this super-hard material can now be 3D […]

Stratasys Plans additional Strategic Investment in Xaar 3D Ltd

Xaar, A world leader in industrial inkjet technology, announces that Stratasys, has entered into an agreement to purchase shares of Xaar 3D Ltd that will increase Stratasys’s stake in Xaar 3D from 15 to 45 percent, with Xaar plc, through […]

COBOD re-prints Europe’s first 3D printed building, The BOD, in just 3 days

Precisely two years ago on September 11, 2017 COBOD invited the press to see the start of the 3D printing of The BOD, Europe’s first 3D printed building. Now with their newly developed second generation BOD2 3D construction printer, COBOD […]

Accreate Labs and JSS School of Pharmacy to host Bio-printing seminar

Bio-printing is an extension of traditional 3D printing. Bio-printing can produce living tissue, bone, blood vessels and potentially, whole organs for use in medical procedures, training and testing. The interest about 3D-printing has risen spectacularly in the last few years. With continued progress, it […]

Accreate Labs and JSS College of Pharmacy to host Bio-printing Seminar

Bio-printing is an extension of traditional 3D printing. Bio-printing can produce living tissue, bone, blood vessels and potentially, whole organs for use in medical procedures, training and testing. The interest about 3D-printing has risen spectacularly in the last few years. With continued progress, it […]

CELLINK launches new six-printhead bioprinting system called BIO X6

Swedish 3D bioprinter and materials developer CELLINK has announced the launch of BIO X6, a new six-printhead bioprinting system that allows the combination of multiple materials, cells and tools. It also features an intelligent exchangeable printhead system and CELLINK’s patented Clean Chamber Technology […]

Harvard researchers pioneer new bioprinting process called SWIFT

A team of researchers from the Harvard Wyss Institute for Biologically Inspired Engineering and John A. Paulson School of Engineering and Applied Sciences (SEAS) has made a breakthrough in 3D bioprinting which could overcome a significant challenge in the field […]

Wayland Additive raises £3 million to develop electron beam additive manufacturing systems

Wayland Additive, a metal 3D printing start-up based in West Yorkshire, UK, has raised £3 million in funding to develop fast and reliable electron beam additive manufacturing systems for aerospace and medical industries. Longwall Ventures and the Angel CoFund have led the investment. […]

Keselowski Advanced Manufacturing continues accelerated growth in hybrid manufacturing

Keselowski Advanced Manufacturing (KAM) continues its accelerated growth in hybrid manufacturing with the completion of key industry certifications in ISO 9001:2015 and AS9100D.  These certifications set strict quality standards and guidelines in the aerospace and defense industries and further speak […]

CRP Technology’s isotropic PA Windform ® P1 shortlisted for TCT Awards 2019

Italian-based CRP Technology, 3D printing leader for the most advanced industrial sectors, gained new international success. CRP Technology’s Windform® P1 has been shortlisted for the Materials Award – Polymers at the TCT Awards 2019, following some strong competition and an intensive […]

Digital Metal® launches two superalloys for extreme applications

Due to rising demand for 3D-printable superalloy materials from companies in the aerospace, automotive and industrial segments, Digital Metal® now launches two superalloy grades for use in extreme environments. The grades are named DM 247 and DM 625.The unique properties […]

Wipro 3D and NDRF join forces to work in design for additive manufacturing of aerospace systems

The National Design and Research Forum joined hands with Wipro 3D to work together in design for additive manufacturing of aerospace systems and developing related industry standards. According to an MoU signed on Friday, NDRF and Wipro 3D would also […]

Forecast3D installs two HP Multi Jet Fusion 5210 3D printing platforms

Forecast3D has installed two HP Multi Jet Fusion 5210 platforms and is among the first manufacturers to use BASF’s newly qualified ULTRASINT thermoplastic polyurethane (TPU) material. The Californian 3D printing service provider now has a fleet of 26 HP additive manufacturing machines and will be […]

TOYOTA Motorsport and 3D Systems join forces to drive innovation for automotive industry

3D Systems and TOYOTA Motorsport GmbH (TMG), a wholly owned subsidiary of TOYOTA Motor Corporation, announced they have entered a partnership to change automotive engineering. TMG is recognized as a global leader in motorsport, providing services to external clients as well as […]

Renishaw to showcase metal additive manufacturing applications at TCT Show

Renishaw will showcase a number of applications to demonstrate the capabilities of its metal additive manufacturing (AM) technology at the upcoming TCT Show. The company will spotlight Domin Fluid Power’s direct drive valves which were manufactured on the RenAM 500Q platform in a smaller […]

Wohlers Associates and America Makes Offer Course on Design for Additive Manufacturing for Managers and Executives

Wohlers Associates and America Makes are partnering to offer a one-day design for additive manufacturing (DfAM) course for managers and executives. Following the success of previous DfAM courses conducted for engineers and designers on four continents, this course is the […]

axial3D to open in-house 3D print lab at Newcastle Hospitals

UK-based company axial3D is taking another big step in its mission to help the healthcare sector adopt 3D printing technologies. Working with the Orthopaedic and Spinal Surgeons at Newcastle Hospitals NHS Foundation Trust, axial3D will provide a new in-house 3D printing facility […]

Formula 1 & FIA use Additive Manufacturing to build 50% scaled models to test their 2021 Car Regulations

Formula One (F1), the premier world championship for motor racing and its governing body the Fédération Internationale de l’Automobile (FIA), have used additive manufacturing to help determine the design, rules and regulations of its 2021 cars. Each F1 season, the FIA issues new […]

DNV GL awards thyssenkrupp first Additive Manufacturing Approval of Manufacturer certificate

The shipping industry is looking to take advantage of additive manufacturing (AM), also known as 3D printing, to print spare parts, thereby reducing lead times, costs, stock requirements, and environmental impacts. Certification ensures that AM part users can have the […]

Splitvision improves medtech prototyping with Figure 4 3D printing

3D Systems recently revealed that Stockholm-based product design firm Splitvision Design was one of the first companies in the Nordic region to adopt its Figure 4 Standalone 3D printer. Since installing the scalable additive manufacturing solution, the Swedish agency has seen drastic […]

UK Surgeons fit 3D printed sternum implant in a patient

Surgeons at Queen Elizabeth Hospital in Birmingham, UK, have fitted a 3D printed sternum implant in a patient to help repair their breastbone. Linda Edwards, a 52-year-old mental health support worker from Fleetwood, Lancashire, suffered from a collapsed breastbone following complications in […]

Brulé to distribute Nexa3D’s NXE 400 3D printer in Japan

Nexa3D is entering the Japanese market after signing an agreement with Asian 3D printer supplier Brulé. Brulé is counted among the oldest resellers of 3D printing systems in Japan. It has been supplying a host of additive manufacturing products to industrial and […]

EWF launches additive manufacturing qualification system for operators and engineers

The European Federation for Welding, Joining and Cutting (EWF) has launched an international education, training and qualification system for additive manufacturing personnel. Divided into two levels, one for operators and one for engineers, the system currently provides qualifications relating to the application of […]

Cytosurge announces spin-off of its 3D printing business unit

The 3D Printing business unit of Cytosurge has been recognized as the technological global market leader for additive manufacturing of microscopically small metal components. We are pleased to announce as of today that all 3D Printing activities of Cytosurge will […]

GE Additive inaugurates Arcam EBM Center of Excellence in Sweden

GE Additive officially opened its Arcam EBM Center of Excellence in Gothenburg, Sweden. Situated at the Mölnlycke Business Park – in Härryda municipality, southeast of Gothenburg – and with capacity for up to 500 employees, the new 15,000 square meter facility, […]

Jabil unveils plans for $42M medical 3D printing of excellence

Global manufacturing services company Jabil has revealed its intentions to establish a new 3D printing center of excellence in the U.S. To create the center, the company is planning to invest around $42 million to expand a healthcare facility in Albuquerque, New Mexico. […]

Oliver Cabell introduces $95 sneakers 3D printed from recycled water bottles

Independent footwear brand Oliver Cabell has entered the blossoming market of 3D printed shoes with the release of its new “Phoenix” sneaker. Priced at $95, the simple but stylish shoe is 3D printed from recycled water bottles and can be […]

GE Additive to deliver industrial-scale 3D printing to New South Wales space hub

GE Additive has signed a Memorandum of Understanding with the New South Wales (NSW) Government to deliver enhanced 3D printing capabilities to a new space industry centre. It follows an agreement between NSW Government and 18 space companies, research and education initiatives, and […]

Airwolf 3D introduces compact EVO R 3D printer for schools

California-based 3D printing company Airwolf 3D has released the latest 3D printer in its EVO series, the EVO R. Made in the United States, the new 3D printer was developed with dependability, safety and efficiency in mind and is being marketed to […]

LIMB-Art teams up with Design Reality to 3D print prosthetic leg covers

Prosthetic leg cover design firm LIMB-Art is harnessing 3D printing to produce its products through service provider Design Reality. LIMB-Art and Design Reality are both based in North Wales and, working together, are leveraging the capabilities of HP’s Multi Jet Fusion 4200 platform to create custom prostheses […]

Musashi Seimitsu Industry and KeraCel partner to develop solid state batteries for Musashi’s motorcycle business

Musashi Seimitsu Industry and KeraCel have formed a strategic partnership to bring safe, 3D printed, solid state batteries to their markets. Musashi’s strategic investment accelerates KeraCel’s development of its additive manufacturing solid state battery technology to high volume production. “Partnering […]

Samsung introduces new Galaxy Note 10 with 3D scanning capabilities

Samsung has unveiled its Galaxy Note 10 line of premium smartphones one of which comes equipped with 3D scanning capabilities. Described as a “groundbreaking first for the Note,” the Galaxy Note10+ is installed with a DepthVision camera, allowing users to scan objects […]

Cobra Aero optimizes UAV engine cylinder with metal additive manufacturing

After successfully optimizing its design processes for aircraft and motorcycle engines in collaboration with UK-based metal AM company Renishaw, engine manufacturer Cobra Aero has decided to invest in its own AM 400 3D printer. Prior to the investment, Cobra Aero worked […]

SYMPA consortium to develop composite SLA 3D printing materials for automotive sector

German chemical company Henkel has joined an R&D project called SYMPA in partnership with Rapid Shape GmbH, cirp GmbH and others. The project, which is supported by the German Federal Ministry of Education and Research (BMBF1) and the Federal Ministry […]

Dunlop Systems integrates Markforged 3D printing for internal and customer tooling

UK automotive manufacturing firm Dunlop Systems and Components has integrated Markforged’s 3D printing technology into its business to produce custom tooling. The company is projecting savings of up to £40,000 a year as a result of the move which has seen them bring in-house […]

Keselowski Advanced Manufacturing and Elementum 3D partner to be powerhouse duo in additive manufacturing

Keselowski Advanced Manufacturing (KAM) announced a partnership with additive materials development leader, Elementum 3D, where the companies will collaborate to create new opportunities for entry into the additive manufacturing (AM) industry. Elementum 3D is supplying KAM with advanced materials for […]

EIT Digital launches Automation Support for Additive Manufacturing program

Automation Support for Additive Manufacturing, an activity supported by EIT Digital as part of the OEDIPUS High Impact Initiative intends to make it easier and faster for businesses to switch from traditional to additive manufacturing. The activity’s partners are Aalto University, Siemens, […]

Largest 3D construction printer in the world ready to be sent from COBOD to The Middle East

COBOD is ready to ship the world’s largest 3D construction printer to Elite for Construction & Development Co., Saudi Arabia, after successfully completing the dry and full testing of the printer. This BOD2 configuration is the largest COBOD has done […]

MakerBot introduces new METHOD X manufacturing workstation

MakerBot is launching METHOD X, a new manufacturing workstation engineered to challenge traditional manufacturing with real ABS (acrylonitrile butadiene styrene) material for durable parts, a 100°C chamber, and Stratasys SR-30 soluble supports. METHOD X can withstand up to 15°C higher temperatures, […]

Airbus to test and evaluate Sigma Labs PrintRite3D additive manufacturing quality assurance technology

Airbus will deploy the latest version of Sigma Labs’ PrintRite3D quality assurance hardware and software in a test and evaluation programme. This partnership comes months after Sigma Labs joined the Fraunhofer IAPT Additive Alliance network, of which Airbus is also involved with. The aircraft company will […]

GE Additive ships first M Line Factory AM system to Cincinnati facility

GE Additive announced that it successfully shipped the first Concept Laser M Line Factory additive manufacturing system from its facility in Germany to the U.S. this weekend. The system, which will be installed at GE Aviation’s Additive Technology Center in Cincinnati, […]

S-Squared 3D Printers completes construction of largest 3D printed home in 12 hours

New York-based 3D printing firm S-Squared 3D Printers Inc. (SQ3D) says it has completed construction of the largest 3D printed home in the world using its Autonomous Robotic Construction System (ARCS). The 3D printed building spans 500 ft² and reportedly took under […]

ArcelorMittal to develop new metal materials for AM

ArcelorMittal S.A., a major steel and mining company headquartered in Luxembourg and with locations in over sixty countries, has signed up as a partner in IAM 3D HUB, Barcelona, Spain, a digital innovation hub which aims to accelerate Additive Manufacturing […]

MakerBot inaugurates first Innovation Centre in New York City

U.S. based desktop 3D printer manufacturer MakerBot has opened its first Innovation Center in New York City at St. John’s University, Queens. In addition to the new hub, 3D printing has been incorporated into both humanities and science courses at St John’s University’s […]

Dynamism to distribute Nexa3D NXE400 3D printing platform through North America

Dynamism has struck a deal with Nexa3D to distribute the vendor’s stereolithography 3D printing platform throughout North America. Nexa3D, born in Rome, Italy, and now headquartered out of Ventura, CA, has recently launched to market its NXE400 platform, which is said to print at speeds […]

SpaceX launches nScrypt’s BioFabrication Facility bioprinter into space

It’s official, nScrypt’s BioFabrication Facility (BFF) bioprinter was launched into space yesterday aboard the SpaceX CRS-18 Cargo Mission. The bioprinting system is now on its way to the International Space Station (ISS), where it will ultimately be used to print adult human cells and […]

Design brand Freshfiber introduces new 3D printed lamps

The Dutch are known for many things, like tulips, delicious stroopwafels and, above all, design. Globally, the Netherlands is recognized as a prolific hub for architecture, fashion and product design—a reputation that rings true when visiting the Northern European nation, […]

ETH Zürich and Strait Access Technologies join forces to 3D print heart valves from silicone

Researchers from ETH Zürich, Switzerland, and South African medical device manufacturer Strait Access Technologies (SAT) are developing 3D printed artificial heart valves from silicone. As reported in an article in the latest issue of the scientific journal Matter, it is recognized that current heart […]

Omni3D company presents new machines at the trade fair 3D Solutions in Poland

The first half of June for Omni3D means 3D Solutions fair during where the premiere of two printer models took place: Omni 500 Lite and Omni Factory 2.0 Net. June also marks a participation in the AutoEvent conference. 3D Solutions […]

Georgia Tech researchers 3D print ant-sized, vibration-powered robots

Researchers from Georgia Tech have developed tiny 3D printed robots measuring about 2 mm in length that use micro bristle technology and vibrations to move around. The teeny bots, produced using two-photon polymerization lithography (TPP), could have diverse applications, including […]

Igus develops new iglidur J350 tribo filament for temperature stable 3D printing

Wear-resistant and maintenance-free special parts for extreme conditions are quickly manufactured with iglidur J350 In order to quickly replace worn parts for high-temperature applications, igus has now developed a filament made from the wear-resistant lubrication-free and maintenance-free iglidur J350 material. […]

Zortrax 3D prints parts for Polish electric motorbike Falectra

Zortrax, a Polish 3D printer and materials manufacturer, has prototyped numerous parts for Falectra, the first Polish electric motorbike brand. Using the manufacturer’s Layer Plastic Deposition (LPD) 3D printers and Z-ULTRAT filaments, Falectra has managed to create a fully-functional prototype within its tight budget. Both economical and green, […]

Rolls-Royce@NTU Corporate Laboratory to address 3D printing challenges in next $64.8M phase

The Rolls-Royce@NTU Corporate Laboratory in Singapore is entering a new phase to help improve the city-state’s manufacturing operations, particularly in the aerospace industry. Additive manufacturing, AI, Data Analytics, Machine Learning and the Internet of Things will all play a part in the facility’s […]

XtreeE rolls-out its global network of connected 3D printing units for construction

XtreeE, the French start-up pioneering large-scale 3D printing for construction, has begun the deployment of its network of connected 3D printing units. Following its pilot plant in Paris, France, XtreeE will start a new production unit in Dubai, United Arab […]

XponentialWorks opens new manufacturing facility to scale commercialisation efforts of start-up network

XponentialWorks has announced the opening of a new manufacturing facility at its Ventura-based Innovation Labs. The development has seen floor space double and could create more than 100 high-tech and high-skilled jobs within the next 12 months. It coincides with the […]

NASA awards $73.7 million contract to Made In Space for demonstrating 3D printing in a Low Earth Orbit

Californian off-world manufacturer Made In Space has been awarded with a $73.7 million contract from NASA to demonstrate 3D printing in a Low Earth Orbit (LEO). Using Archinaut One, a small spacecraft capable of additive manufacturing in micro-gravity, Made In […]

Covestro boosts production of Carbon’s polyurethane liquid resin for 3D printing

Leading polymer manufacturer Covestro and 3D printing company Carbon are teaming up to scale up production of Carbon’s polyurethane liquid resin material. The material, which is suitable for producing production parts using Carbon’s Digital Light Synthesis (DLS) technology, will now be produced at high […]

Bralco Advanced Materials sign MoU with GE Additive to develop 3D printed magnetic components

Bralco Advanced Materials has signed a Memorandum of Understanding with GE Additive to work on the development of 3D printed magnetic components. Through the MoU, the research, product development and commercialisation company is looking to harness GE Additive’s expertise in powder manufacturing and […]

CADENAS announces launch of search engine for technical 3D models

CADENAS, a German software developer specializing in strategic parts management and parts reduction, has introduced its latest platform,, a visual search engine that enables engineers and professionals to find and download millions of CAD and BIM 3D models from manufacturer […]

AMTech Outreach Programs to Promote Additive Manufacturing

2018 has been positive for the Additive Manufacturing industry in India, which is also evidenced by its growth and validation from the mainstream manufacturing industry. Additive Manufacturing is moving from a phase of awareness to adoption and the end user […]

Cadbury introduces world’s first Cadbury Dairy Milk 3D Printer

In a world premiere, CADBURY DAIRY MILK launched the very first CADBURY DAIRY MILK milk chocolate 3D Printer, in celebration of World Chocolate Day on July 7, 2019. From World Chocolate Day, CADBURY DAIRY MILK offers Melburnians the chance to […]

Indian 3D Printing Network to organize AMTech Outreach Programs to Promote Additive Manufacturing

2018 has been positive for the Additive Manufacturing industry in India, which is also evidenced by its growth and validation from the mainstream manufacturing industry. Additive Manufacturing is moving from a phase of awareness to adoption and the end user […]

RepRap introduces new Liquid Additive Manufacturing (LAM) system

3D printer manufacturer German RepRap has launched a new Liquid Additive Manufacturing (LAM) system. Named the L320, the system has a larger build volume than the L280 German RepRap’s first LAM printer, and can be used to process injection molding grade silicone. According to the […]

WACKER to present new ACEO Imagine Series K2 3D printer at K 2019 event

German chemical group WACKER is preparing to introduce a new and improved version of its ACEO 3D printing technology for silicone rubber at the upcoming K 2019 International Trade Fair for Plastics and Rubber. The new 3D printer—the ACEO Imagine Series K2—integrates a range […]

Robert Bosch Venture Capital invests in Xometry’s on-demand manufacturing marketplace

Xometry, an on-demand manufacturing marketplace headquartered in Gaithersburg, Maryland, USA, has announced that Robert Bosch Venture Capital (RBVC) will join the company’s Series D investment round. RBVC reportedly joins Greenspring Associates, Dell Technologies Capital, BMW i Ventures, Foundry Group, GE Ventures, Highland Capital […]

Sandvik acquires stake in an Additive Manufacturing service provider Beam IT

Sandvik has acquired a significant stake in Beam IT, with the right to further increase its stake over time. Beam IT is a leading European-based Additive Manufacturing service provider which will complement and further strengthen Sandvik’s existing offer in metal […]

Fraunhofer IFAM processes and tests new iron powder for Additive Manufacturing

The Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Dresden, Germany, reports that it has successfully processed and tested a new type of iron powder which it believes opens up new possibilities in metal Additive Manufacturing. With the production method, […]

3D Printing Centres of Excellence to be setup across Gujarat

3D Systems today signed a tripartite Memorandum of Understanding between 3D Systems, US Institute of 3D Technology (USI3DT) and the State Government of Gujarat in the presence of the honourable Chief Minister Shri Vijay Rupani to setup seven 3D Printing […]

nScrypt developing ‘ruggedized’ 3D bioprinting solution for military applications

Though bioprinting technologies are steadily advancing, uses for bioprinters have largely been limited to laboratory settings. Though this research-focused side of bioprinting is essential, there are a handful of efforts that are aiming to take bioprinting beyond the lab. For […]

GF Machining Solutions exhibits new DMP Flex 350 3D printer at Solution Days event

At the GF Machining Solutions 2019 Solution Days event, the company showcased two technologies that make clear its intention to move additive manufacturing into production. GF Machining Solutions’ new DMP Flex 350, on display at the company’s Solution Days event, […]

EMO Hannover 2019: TRUMPF is expanding the scope of 3D printing

The high-tech company TRUMPF will show how 3D printing can drive advances in various industrial sectors with a showcase at EMO Hannover, the world’s leading metalworking trade fair. Additive manufacturing processes enable the creation of unprecedented complex shapes that are […]

Peak introduces first fully 3D printed sneakers for under $200

Chinese sportswear brand PEAK Sports Products introduced a new model of fully 3D printed sneakers – upper, midsole and outsole – in the domestic Chinese market. As leading Chinese 3D printing media Nanjixiong reports, the first 600 pairs of the new FUTURE FUSION […]

Volkswagen opens new Innovation and Engineering Center California; shows off 3D printed hippie van

Volkswagen Group of America’s former Electronics Research Laboratory (ERL) is evolving into the new Innovation and Engineering Center California. The IECC will be the largest Volkswagen vehicle research facility outside Germany (with lots of 3D printers inside of course), and […]

WACKER introduces new 3D silicone printer, the ACEO Imagine Series K2

German Chemical group behind ACEO silicone rubber 3D printing WACKER has announced a range of new products to be presented later this year at the K 2019 trade fair in Düsseldorf. As well as materials, WACKER will debut its new 3D silicone printer, the ACEO […]

EOS India concludes the first ever User Day in Bengaluru.

EOS India concluded their first ever User Day that witnessed a footfall of over 100 industry leaders representing various industry segments. The insightful and educational conference elucidated the latest AM industry trends (India specific) with a focus on how organizations […]

Divide By Zero launches High Speed FFF 3D Printer

One of India’s largest 3D printer manufacturer, Divide By Zero has unveiled the AION500 MK3 – one of the fastest 3D Printer in the world, at the Automotive Engineering Show in Chennai. Speaking at the launch, CEO & Founder Swapnil […]

Ai Build unveils new AiCell Medium with live furniture 3D printing

Ai Build announced a new version of AiMaker with AiCell Medium, the latest addition to its fleet of autonomous large scale 3D printers. This new solution is being demonstrated to the public with a live furniture 3D printing show at Future […]

Additive manufacturing to generate $100 billion of incremental value by 2025

A whitepaper on additive manufacturing (AM) potential in the ASEAN region has been revealed by thyssenkrupp. It is a comprehensive research undertaken by the company as a prelude to the official inaugural of its AM TechCenter Hub in Singapore. Thyssenkrupp developed […]

NASA secures funding for 3D printing projects helping 2024 Moon landing

American space agency NASA has just secured funding for approximately 18 early-stage 3D printing projects developing technologies to help on its next mission to the Moon. As part of the agency’s 2019 Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) seed programs, […]

Titomic and C.A .PICARD partner to develop 3D printed parts for extruders

Australian metal 3D printer manufacturer Titomic has entered into an agreement with German international metal parts manufacturer C.A .PICARD. Together the partners will produce prototype 3D printed parts for extruders used in the production of a wide range of food & feed products, […]

COBOD supplies 3D construction printer to another European R&D organization

Following the delivery of the BOD2 construction printer to the Belgian R&D organization Kamp C in the beginning of the year, COBOD is now delivering yet another BOD2 to a European R&D facility. A few months ago COBOD won the […]

SCANLAB unveils innovative scan system called XL SCAN to process 3D-shaped large workpieces

SCANLAB GmbH, a provider of galvo-based scan solutions based in Puchheim near Munich, Germany, presented its new XL SCAN system at last week’s LASER World of PHOTONICS 2019 trade show in Munich. The innovation with this system lies in the design of […]

MakerBot provides 3D printing technology to German media centre network for educational purposes

MakerBot is supplying a 34-strong network of media centres with 3D printing technology and educational materials in southern Germany. The desktop 3D printing vendor has announced a partnership with LandesmedienzentrumBaden-Württemberg (LMZ), which offers technology, advanced media, and technical support to students, educators, youth […]

Objectify to showcase its Additive Manufacturing capabilities at AES 2019

India’s leading additive manufacturing solution provider, Objectify Technologies is all set to showcase its capabilities at the upcoming AES 2019 at Hall No. 1, Booth No. A14, India’s most awaited Automotive Show. Scheduled to take place from July 4-6 at […]

CRP Technology announces new Windform® FR1 material for Additive Manufacturing

Since mid-90’, CRP Technology has been changing the rules of additive manufacturing, smashing records and setting models nowadays that apply to the 3D printing technology with polyamide materials. A clear sign of this continued performance is Windform® FR1 (FR stands […]

Hexagon announces acquisition of AMendate to shape the generative design market for AM

Hexagon’s Manufacturing Intelligence division recently announced that Hexagon has entered into a definitive agreement to acquire AMendate, a German-based start-up providing simulation software solutions that support the generation and optimisation of designs for additive manufacturing. AMendate will join Hexagon’s MSC […]

New Balance and Formlabs partner to drive footwear performance and customization

Performance is in the details. In footwear, that means design and materials—both of which are ultimately bound by manufacturing. In 2017, New Balance began a partnership with Formlabs to develop a 3D printing production system to open innovation opportunities on both fronts, […]

BeamIT and SLM Solutions sign deal to expand cooperation on metal AM

BeamIT, an Italian additive manufacturing service bureau, and SLM Solutions have signed an agreement to expand its long term cooperation. BeamIT will also expand its product portfolio with two new machines – the SLM 280 2.0 and SLM 500 – with which […]

F1 team of Alfa Romeo Racing strengthen Technology Partnership with Additive Industries

At the opening of the Rapid.Tech – Fabcon Conference on industrial 3D Printing in Erfurt, Additive Industries announced that it has strengthened its Technology Partnership with the F1 team of Alfa Romeo Racing. On behalf of Alfa Romeo Racing, Sauber […]

VELO3D to Manufacture Flight Hardware for Boom Supersonic’s Demonstrator Aircraft

 VELO3D , the leader in 3D metal printing, recently announced that it has partnered with Boom Supersonic, the Colorado company building history’s fastest supersonic airliner, to manufacture the flight hardware necessary to build XB-1, Boom’s Mach-2.2 supersonic demonstrator aircraft. Boom is leveraging VELO3D’s  Intelligent […]

ExOne and Siemens Partner to Bring Industry 4.0 to Industrial 3D Printing

The ExOne Company (“ExOne”), the global leader in industrial sand and metal 3D printers using binder jetting technology, recently announced a partnership with Siemens, the global technology powerhouse in automation and digitalization, that will benefit industrial customers in the foundry, […]

Carbon raises over $260M in growth funding round

Carbon, the world’s leading digital manufacturing platform, recently announced it has raised over $260 million in growth funding co-led by Madrone Capital Partners and Baillie Gifford. New investors Temasek and Arkema joined the round with participation from existing investors including Sequoia […]

Oerlikon AM and MT Aerospace partner to accelerate production of additive parts for aerospace and defense industries

Oerlikon AM and MT Aerospace have partnered to accelerate the use of additive parts in the aerospace and defense industries. The partnership aims to bring efficiency and cost savings to the aerospace and defense market by providing end-to-end solutions to […]

Design – A Critical Factor in AM Economics and Adoption

Wohlers Report 2019, an annual report on the additive manufacturing (AM) industry, includes detailed input from 127 providers of AM services worldwide. Companies with both metal and polymer AM services reported that more than 26% of a part’s cost is […]

GE Additive Education Program reaches over one million students

The GE Additive Education Program’s (AEP) third cycle – 2019/2020 – will grant polymer 3D printing packages to 982 primary and secondary schools and reach 793,000 primary and secondary school students in 23 countries. Since its foundation in 2017, over […]

Titomic and TAUV announce completion of prototyping stage of collaboration

Titomic, an Australian company specializing in metal additive manufacturing, is moving into the next stage of its joint project with TAUV, a developer of 3D printed armour and defense systems. The companies first partnered in fall 2018 on the TAUV […]

Topology Optimized Design of Automotive Steering Bracket by Wipro 3D

In the highly competitive Auto industry, speed to market, high strength to weight ratios and fuel efficiency are some of the considerations that constantly drive engineers and designers. Additive Manufacturing (AM) aligns with the needs of the automotive industry, driving […]

Carpenter Technology and BMT Aerospace join forces to develop additively manufactured aerospace pinion

Carpenter Technology Corporation and Belgium-based BMT Aerospace are cooperating in the development of an additively manufactured (AM) aerospace pinion, using Carpenter Technology’s Custom 465 Stainless. The collaboration was announced at the ongoing Paris Air Show. BMT Aerospace and its subsidiary BMT Additive initiated the project by […]

European Integradde project launched to develop DED Additive Manufacturing

A European consortium of twenty-six partners from eleven countries has launched a €17 million project with the aim of developing a novel end-to-end solution capable of demonstrating the potential of Directed Energy Deposition (DED) processes for the metal Additive Manufacturing […]

FusiA Aeroadditive opts for GE Additive Concept Laser M2 technology

GE Additive yesterday announced at the Paris Air Show that Toulouse-based FusiA Aeroadditive – part of the French group Freyssinet AeroEquipment and the Canadian FusiA Group –  will invest in its first GE Additive Concept M2 multilaser system. Financial terms of the deal were not disclosed. […]

NAMIC joins AMTech 2019 as Association Partner

National Additive Manufacturing Innovation Cluster (NAMIC) Singapore will be collaborating as Association Partner in AMTech Expo 2019. This is the first step taken by both Indian 3D Printing Network (I3DPn) and NAMIC to foster international networking opportunities between the Additive […]

CADSPEED uses TRUMPF TruPrint 1000 metal 3D printer to boost dental manufacturing

A CNC digital milling centre in Germany has reported how the recent expansion of its in-house metal 3D printing capabilities is improving the manufacture of dentures. CADSPEED, based in Hanover, is using the TRUMPF TruPrint 1000 in place of conventional and time-consuming […]

Rolls-Royce announces to 3D print aerospace parts with SLM Solutions quad-laser technology

Rolls-Royce, a British manufacturer and distributor of power systems for aviation and automotive industries, has announced plans to 3D print aerospace parts with SLM Solutions quad-laser technology. The engineering giant is also joining SLM’s beta customer programme for future developments. Meddah Hadjar, […]

Frazer-Nash 3D prints Kwikbolt fastener with Renishaw AM 400 3D printer

UK-based precision engineering company Frazer-Nash Manufacturing works with a broad range of clients, many of them in the food manufacturing and aerospace sectors. Since as early as 2014, the company has relied on Renishaw’s metal additive manufacturing technology to produce complex, high quality parts […]

GE Aviation invests in widespread rollout of GE Additive Arcam EBM technology to support GE9X blade production

GE Additive today announced at the Paris Air Show that GE Aviation has made a significant investment in its electron beam melting (EBM) technology, with the purchase of an additional 17 A2X systems and 10 Spectra H systems. Financial terms of the deal were […]

Safran introduces 3D printed Add+ engine technological demonstrator

With day two of the Paris Air Show underway, it is becoming clear that there is a significant emphasis on additive manufacturing at the event, with aerospace companies further investing in 3D printing or partnering with AM leaders. Recently, France-based aerospace and […]

BigRep’s Innovation Consultancy creates world’s first 3D printed green wall

Though technology is often thought of in contrast to the natural world, certain innovations—such as generative design and 3D printing—are helping to connect us to nature in new and exciting ways. Large-format 3D printing company BigRep, for instance, recently unveiled a […]

CyBe Construction to build houses in UAE using 3D printing technology

Dutch concrete 3D printing company CyBe Construction has been selected as a technology provider for the building of houses in the United Arab Emirates (UAE). Planned to be built in the Sharjah Research, Technology and Innovation Park (SRTI Park), the project aligns with Sheikh Mohammed […]

Indian 3D Printer manufacturer installs 3D printed sculpture at Mumbai International Airport

India-based 3D Printer manufacturer Fracktal Works have installed a fully 3D printed sculpture at the Mumbai International Airport, in partnership with London-based architectural studio Nudes and Folds Design Studios. Named “Jhada”, the installation spans over 8ft high and 6ft in breadth and comprises […]

A DigiTool project aims to improve tool & die manufacture by using 3D printing

The University of Strathclyde’s Advanced Forming Research Centre (AFRC) is collaborating with a consortium of six other companies on the £1.2 million DigiTool project, which aims to improve the lifespan and functional performance of dies used by the UK’s tool […]

HP inaugurates new centre of excellence for 3D printing in Barcelona

HP has opened a 150,000 square-foot centre of excellence for 3D printing and digital manufacturing in Barcelona. The new facility has been established to enable collaboration between vendor, customers, and partners in a factory-like environment, actioning further research and development around […]

Design Reality installs HP MultiJet Fusion 4200 3D printer

Design Reality, a North Wales-based industrial design company, has installed an HP MultiJet Fusion 4200 platform to enhance its in-house capabilities and reduce outsourcing. The machine was installed back in October 2018, and has enabled Design Reality to move through design, prototyping and production of […]

Thor3D and Polyga announce partnership

Today, Thor3D and Polyga proudly announce their unique partnership. Their collaboration will be twofold: Thor3D and its partners will act as resellers for Polyga’s XTract3D software while Polyga, based out of Vancouver, will become Thor3D’s distributor for Calibry 3D scanners […]

Ai Build unveils computer vision for real-time 3D printing quality control

Ai Build, a London-based AI and automated 3D printing specialist, has introduced a real-time quality inspection tool. Using computer vision and AI, the new feature of the AiMaker fleet will help improve the accuracy of large-scale 3D printing projects. According to Daghan […]

Inkbit introduces a material jetting 3D printer powered by machine vision and AI

The last few years have shown us that there are many ways to overcome the constraints of 3D printing and evolve the technology to cater to the demands of end-use part production. Inkbit, a 2017 spinout from the MIT Computer Science and […]

Toolcraft cuts cycle time by 30% with 3D printed tool for injection molding

German metal processing company Toolcraft is recognizing the benefits of integrating additive manufacturing into its injection molding and mold making processes. The company recently completed a successful project for the optical industry using metal AM in collaboration with Siemens. The in-house […]

Michelin and General Motors develop new airless 3D printed fully recyclable car tire

Michelin and GM, two companies that have been making very significant investments in additive manufacturing just presented a disruptive concept for an airless, 3D printed fully recyclable car tire. The Uptis Prototype represents a major advancement toward achieving Michelin’s VISION concept, which […]

Boosting Additive Know-How for drupa 2020

From 16 to 26 June 2020, Düsseldorf will once again be the epicentre of the global printing, media and packaging industry. More than 250,000 visitors, 1,800 exhibitors and just as many journalists from over 180 countries will flock to drupa, […]

Renishaw introduces new blue laser tool measurement solution called NC4+ Blue system

The UK headquartered metrology and additive manufacturing specialist Renishaw has launched a new non-contact tool measurement solution, the NC4+ Blue system. Integrated into the company’s NC4 range of tool setters launched in 2017, the NC4+ Blue system features patent-pending blue laser […]

Premium Aerotec achieves qualification of multi-laser metal additive manufacturing process for aviation sector

Premium Aerotec has announced it has achieved a complete process qualification for additively manufactured titanium parts in multi-laser systems for the aviation industry. It comes after a successful industrial process audit carried out by Airbus on April 11, with signing of the qualification […]

French Army to install two Prodways SLS 3D printers

We often hear about the ways in which 3D printing is being explored and leveraged by the U.S. military. However, it’s not only Americans that are adopting the technology for defense-based purposes. In France, for instance, the army recently acquired […]

Sintavia and Howco launch joint venture for additive manufacturing in oil & gas industry

Metal additive manufacturing company Sintavia LLC is primarily known in the industry for serving the aerospace and defense industries with its varied and cutting-edge manufacturing capabilities. A recent partnership announcement, however, has signalled that the Florida-based company is expanding its offering into […]

3D Systems Advancing High Performance Automotive Sector with Leading Industry-specific Workflow Solutions

3D Systems recently announced two customers – Rodin Cars and Stewart-Haas Racing – that are using the company’s plastic and metal 3D printing solutions to dramatically improve speed and performance in their cars. With the help of 3D Systems, Rodin Cars and […]

Continental inaugurates new Additive Manufacturing competence centre

Automotive manufacturing company Continental AG, headquartered in Hannover, Germany, has opened an Additive Manufacturing competence centre in the town of Karben, Germany. Under the leadership of its development and production service provider, Continental Engineering Services, the company stated that it […]

ISF Incubator and NTU announces 3D printing joint venture

Nanyang Technological University (NTU)’s innovation and enterprise company, NTUitive, has formed a 3D-printing joint venture with ISF Incubator, the technology-focused start-up accelerator arm of global invention and investment business Intellectual Ventures. The Secur3DP+ joint venture will make additive manufacturing a […]

Evatronix introduces new eviXmatic inspection system

Polish 3D scanner manufacturer Evatronix SA has launched the eviXmatic inspection system. Debuting in North America at RAPID + TCT 2019 last week, the new hardware provides fully automated, non-contact measurements of parts. It also highlights the company’s strategy within the U.S. market. […]

Solvay announces partnership with Stratasys to produce high-performance 3D printing materials

Global specialty chemicals company, Solvay has announced a cooperation agreement with additive manufacturing leader, Stratasys to develop new high-performance materials for exclusive use in its FDM F900 3D printers. The announcement came during RAPID + TCT last week as the companies outlined plans to co-develop a […]

NY-based PENSA integrates METHOD 3D printer for product development

Product design and engineering firm PENSA is seeing the benefits of integrating additive manufacturing into its design and development workflows. The company, which had mainly been working with industrial 3D printing for limited applications in its design process, recently expanded […]

Design startup introduces eco-friendly 3D printed homeware

3D printing has been something of a miracle for product designers, and especially for individual designers or small startups, as it enables the production of unique or one-off pieces. London-based is a design startup that has exploited the benefits of […]

Heineken utilizes Ultimaker S5 3D printer to develop custom tool and functional machine parts

Heineken has harnessed Ultimaker’s S5 3D printing platform to produce custom tools and functional machine parts in its brewery in Seville. The company is designing and printing safety devices, tools and on-demand parts, increasing productivity and reducing production costs by 80%. Typically, these parts […]

MakerBot introduces new PETG filament for its METHOD 3D printer

3D printer manufacturer MakerBot is expanding its material portfolio for its METHOD 3D printer with the release of polyethylene terephthalate glycol or PETG. The PETG filament marks the first specialty material to be released by MakerBot for its METHOD printer. MakerBot introduced […]

HRE Wheels unveil revised version of HRE3D+ titanium wheel

HRE Wheels has announced the release of a newly revised version of its revolutionary HRE3D+ titanium wheel made using additive manufacturing. To improve the HRE3D+ concept, HRE has again teamed up with GE Additive to utilize the brand’s 3D-printed multiple […]

KODAK 3D Printing introduces new Design to Print Service

KODAK 3D Printing announced the launch of its new Design to Print Service this week. The new service marks an expansion of KODAK’s 3D printing business, from printer and filament supplier to service provider. Over the course of the next […]

TÜV SÜD certifies Rosswag as manufacturer of metal powder for additive manufacturing

The quality of metal powder is a crucial factor for reliable additive manufacturing (AM) using laser powder-bed fusion (LPBF) machines. TÜV SÜD Industrie Service GmbH has now completed its first audit of a manufacturer of metal powder at Rosswag GmbH. […]

Renault F1 Team signs additive manufacturing agreement with Jabil

Renault F1 Team and Jabil announced an additive manufacturing agreement to speed the development and delivery of 3D-printed race car parts for the Renault R.S.19 competing in the 2019 Formula One World Championship. Through the Jabil Additive Manufacturing Network, Renault […]

Intech DMLS sees strong potential of 3D printing in Indian healthcare industry in future

Credit:  Divya Jyothi Sampathi of Intech DMLS As the emergence of disruptive technologies like 3-D printing and additive manufacturing (AM) accelerates efficiency, the Bengaluru-based Intech DMLS sees that these technologies hold the key to the future in the Indian healthcare […]

Tan Tock Seng Hospital starts using 3D printing technology for orthotic devices

The introduction of 3D scanning and printing technology at  Tan Tock Seng Hospital (TTSH) Foot Care and Limb Design Centre has cut waiting times for patients who require customised ankle-foot orthotic braces. They can now receive one in just one […]

Objectify invests in MSC’s Simufact to streamline AM Process Simulation

MSC Software (MSC), a global leader in simulation software and services, who enable product manufacturers to advance their engineering methods, announced today that it has signed an agreement with Objectify Technologies Pvt. Ltd. to use MSC’s ‘Simufact Additive’ for Additive Manufacturing (AM) […]

Indo-MIM and Desktop Metal Announce Strategic Partnership

Desktop Metal, the company committed to making metal 3D printing accessible to manufacturers and engineers, announced today a strategic partnership with Indo-MIM, the global leader and world’s largest supplier of Metal Injection Molding (MIM) precision-engineered products with over 100 million […]

Inovus Medical installs SLS 3D printer from 3D Systems at its manufacturing facility

Inovus Medical has installed a new production level SLS 3D printer from 3D Systems in its manufacturing facility in St Helens, Merseyside. The laser sintering 3D printer enables the company to produce plastic parts with a finish level that rivals that of […]

BigRep unveils new generation STUDIO printer at RAPID+TCT

BigRep, the global leader in large-format 3D printing, will unveil its new generation STUDIO printer at the RAPID+TCT event in Detroit (May 20 – 23, 2019, BigRep booth 503). The new and improved BigRep STUDIO G2 is designed to print […]

Wabtec sets to produce rail parts with H2 binder jet metal 3D printer from GE Additive

Global rail and transit manufacturer Wabtec has become one the first customers for the H2 binder jet metal 3D printer from GE Additive. The Pennsylvania-based company plans to use the 3D printer to manufacture large, complex parts, growing the use of additive in […]

Virgin Orbit to explore multi-metal 3D printing with NASA Marshall Space Center

The satellite world is undergoing a massive upheaval. Thanks to advancements in computing and new manufacturing techniques, even spacecraft with the most critical responsibilities are becoming smaller and more inexpensive. As a result, satellite owners are building them faster and […]

EOS introduces four new metal materials for series additive manufacturing

EOS, the world’s leading technology supplier in the field of Industrial 3D printing of metals and polymers, presents the four new metal materials EOS StainlessSteel CX, EOS Aluminium AlF357, EOS Titanium Ti64 Grade 5, and EOS Titanium Ti64 Grade 23. […]

Shanghai’s fourth SAMA International Forum and 2019 World 3D Printing Annual Meeting set for August

The fourth Shanghai Additive Manufacturing Association (SAMA) International Forum and 2019 World 3D Printing Annual Meeting will take place in Shanghai, China, from August 16–18, 2019. SAMA states that the 2019 event is expected to attract representatives from over 1000 […]

AM Ventures expands its footprint with new office in Korea

Germany-based strategic investor in Additive Manufacturing, AM Ventures Holding GmbH (AMV), has inaugurated a new office in Busan, Korea, with an aim to expand its worldwide activities and to provide a base for investment in Asia Pacific. According to the […]

KAM strengthens its capabilities with New Capital Investments and Leadership

Keselowski Advanced Manufacturing (KAM) announced additions to the leadership team, additional investments in its lineup of equipment and updates on building out the world-class facility to be the industry leader in hybrid manufacturing. John Murray joins the team as president […]

Artec 3D introduces desktop 3D scanner called Artec Micro

Artec 3D, a Luxembourg-based manufacturer of 3D scanners, has released the Artec Micro. This automated, metrology-grade desktop 3D scanner features twin cameras, designed to capture fine details of small objects. Artyom Yukhin, president and CEO of Artec 3D, said, “Artec Micro embodies the […]

Bombardier Transportation installs Stratasys F900 3D Printer to develop end-use rail parts

Further transforming traditional manufacturing processes with 3D printing, Stratasys recently announced that German-based manufacturer Bombardier Transportation will utilize the large-scale industrial-grade Stratasys F900 3D Printer as part of its operations in the DACH region. The manufacturer will produce final end-use rail parts, as well as manufacturing […]

Siemens presents the next level of digital transformation for the machine tool

Under the slogan “Digitalization in Machine Tool Manufacturing – Thinking further!”, Siemens is presenting numerous extensions to its Digital Enterprise portfolio for the machine tool industry in around 1700 square meters at EMO in Hanover in Hall 9, Booth H50. […]

“Additive manufacturing is an integral part of our future production strategy,” says Christoph Hauck

“We look back on the most exciting and best year in Additive Manufacturing (AM) to date. And 2019 also feels very good,” said Christoph Hauck, Chairman of the Executive Board of the Additive Manufacturing Working Group at VDMA last week […]

Henkel announces acquisition of 3D printing and industrial inkjet company Molecule Corp

Germany-based material giant Henkel recently announced the acquisition of Molecule Corp., a privately owned, technology-driven enterprise focused on product innovation in additive manufacturing. Molecule Corp. provides advanced solutions for 3D printing applications – including medical device, aerospace, automotive and a […]

Kwambio and WeFund Ventures introduce new 3D bioprinting project

Ukranian ceramic 3D printing service provider Kwambio and Estonian early stage investment firm WeFund Ventures have launched a new 3D bioprinting project. Named ADAM, the aim of this joint initiative is to develop an end to end 3D scanning and 3D printing process for […]

Linde and Liebherr-Aerospace Toulouse SAS join forces to optimise additive manufacturing process

Linde recently announced that its collaborative project with Liebherr-Aerospace Toulouse SAS to optimise the benefits of additive manufacturing (AM) for aluminium aircraft components, has delivered definitive results in terms of improvement of product quality and production repeatability. Linde’s ADDvance® O2 precision solution gas […]

Jeff Bezos showcases new Blue Moon lunar lander featuring 3D printed BE-7 engine

Amazon provides a great service to many and at the same time is heavily criticized by many others. The same can be said of (part of) humanity’s dream of colonizing the Solar System. The greatest of all undertakings but also […]

Roboze to showcase its Xtreme series of 3D printers at RAPID+TCT 2019

Italian 3D printer manufacturer Roboze will be showcasing its high temperature ROBOZE Xtreme series for the first time in North America at RAPID+TCT 2019. The exhibition, this year held in Detroit, will take place later this month from the 20th to 23rd of […]

Markforged Partners with Carahsoft to Offer Industrial 3D Printers to Government Agencies

Markforged, the leading manufacturer of metal and carbon fiber 3D printers, and Carahsoft Technology Corp., The Trusted Government IT Solutions Provider®, recently announced a partnership to accelerate the availability of industrial additive manufacturing technologies to the U.S. Government. Carahsoft will serve […]

HP introduces new Jet Fusion 5200 Series 3D printing solution

HP Inc. unveiled a series of innovations and partnerships helping its customers accelerate their digital manufacturing journey.  HP is expanding its industry-leading 3D printing portfolio with the new Jet Fusion 5200 Series 3D printing solution, an industrial 3D printing system […]

Titomic to deliver additively manufacturing test parts for airplanes to The Boeing Company

Australian advanced manufacturing company Titomic Limited recently announced that it has signed an agreement with The Boeing Company (“Boeing”) to deliver additively manufacturing test parts for airplanes. This initial agreement of AUD$170,000 for test parts enables Titomic to partner with […]

ExOne and Oak Ridge National Laboratory collaborate to advance 3D binder jet additive manufacturing

The ExOne Company, a global provider of three-dimensional (3D) printing machines, 3D printed and other products, materials and services to industrial customers, announced a collaboration with Oak Ridge National Laboratory (ORNL), the largest U.S. Department of Energy (DOE) open science […]

DfAM conference by NAMIC brings together the Additive Manufacturing ecosystem

Singapore has been ahead of the curve in identifying and investing in Additive Manufacturing as it seeks to create high-end jobs and offer premium services. To make the most of this buoyant growth, Singapore announced plans in 2013 to invest S$500 […]

NAMIC signs MoU with international 3D printing network MgA

The National Additive Manufacturing Innovation Cluster (NAMIC) signed a memorandum of understanding with Mobility goes Additive (MgA) which is the leading international network of companies, institutions and research institutes working on industrial additive solutions based in Berlin, Germany. The signing […]

Structo announces strategic partnership with uLab Systems to offer orthodontic solutions

Structo, a dental 3D printing solutions provider and uLab Systems, creator of innovative in-office orthodontic treatment planning software, announced a strategic partnership to deliver more tailored in-office orthodontic solutions to clinicians at the AAO 2019 Annual Meeting in Los Angeles. The […]

Aurora Labs unveils new RMP1 Beta 3D Printer

Australian metal 3D printing company Aurora Labs has announced the launch of the RMP1 Beta Printer, a fully operational pre-production 3D printer. The launch of the beta 3D printer takes Aurora Labs one step closer to commercialization goal. The next big step […]

COBOD wins another European tender for a 3D construction printer to a university and is nominated as Start-up of the Year in 3D printing awards

During the Spring COBOD has send out a series of announcements underlining the traction the company has and its’ leading position within 3D construction printing. COBOD has among other announced an order for the biggest mobile 3D construction printer in […]

IIT Delhi 3D prints human skin

Researchers at the Indian Institute of Technology (IIT) Delhi have successfully 3D bioprinted human skin models that have certain anatomically relevant structural, mechanical and biochemical features similar to native human skin. The bioprinted skin produced in the lab by the […]

Objectify aims to strengthen its presence in the US market

India’s leading additive manufacturing solution provider, Objectify Technologies is all set to showcase its capabilities at the upcoming Rapid + TCT Show2019 at Booth #2158, North America’s most influential additive manufacturing event. Scheduled to take place from May 20-23 at […]

CELLINK introduces skin and liver bioprinted tissue model kits

CELLINK, the world’s first bioink company now a global leader in bioprinter systems and bioinks, continues innovating in this segment by introducing new ways to strengthen its position in the field. The just-launched CELLINK tissue model kits focus on two of […]

Additive Manufacturing Standards for Aerospace by ASTM

ASTM International’s additive manufacturing technologies committee is developing four standards that aim to help aircraft parts manufacturers meet safety and performance requirements. ASTM International member Shane Collins notes that the use of additive manufacturing in the aerospace industry (including commercial […]

Relativity Space to launch mu Space low Earth satellite on 3D printed Terran 2 rocket in 2022

Aerospace manufacturer Relativity Space this week announced a new partnership with Thailand-based startup mu Space. The two companies have signed a contract through which Relativity will launch a mu Space low Earth satellite on its 3D printed Terran 2 rocket in 2022. […]

German researchers 3D print transparent human organs

Researchers in Germany have created transparent human organs using a new technology that could pave the way to print three-dimensional body parts such as kidneys for transplants. The scientists, led by Ali Erturk at Ludwig Maximilians University in Munich, have […]

Aeroswift develops 0.5 m tall titanium frame for UAV using 3D Printing

Aeroswift, a metal 3D printer development project backed by the South African government, has successfully completed the fabrication of a large scale component. Over half a meter tall, this titanium frame for a UAV was made to showcase the Aeroswift system’s capabilities. […]

Massive interest for COBOD 3D construction printers at bauma

Before the bauma COBOD International had announced a new exclusive distribution agreement with PERI for Germany, Austria and Switzerland. COBOD followed up on that by being present at the huge 5.000 m2 PERI stand that received almost 30.000 visitors daily. […]

CRP Technology introduces new series of Windform P-LINE materials

CRP Technology, an Italian manufacturer of AM materials, has announced the launch of its new series of Windform P-LINE materials. The new production-grade line of materials is developed specifically for voxeljet’s High Speed Sintering platform, which CRP Technology operates in house. To […]

Poietis granted third patent for its bioprinting technology from European Patent Office

France-based bioprinting company Poietis has been granted a third major patent for its bioprinting technology from the European Patent Office. The patent, “Laser printing method and device for implementing said method,” covers the company’s bioprinting process and specifically its method of printing […]

Wohlers Associates to conduct course on design for additive manufacturing in cooperation with Airbus and ZAL

Wohlers Associates, Inc. is taking its internationally acclaimed course on design for additive manufacturing (DfAM) to Hamburg, Germany. The 13-14 June 2019 course is being supported by Airbus and ZAL Center of Applied Aeronautical Research. The two-day course, hosted by […]

AP&C announces expansion of metal AM powder operations in Quebec

AP&C Advanced Powders & Coatings, a GE Additive-owned manufacturer of metal powders for additive manufacturing, has announced it will be expanding its operations in the Greater Montreal area. As part of the expansion, the Canadian company will increase its production capacity […]

Arrow Digital installs superfast large format Massivit 3D Printer

Arrow Digital installs Massivit 1500, the largest, fastest and most advanced large format 3D printing solution for visual communications, based on Massivit proprietary GDP (Gel Dispensing Printing) technology that enables instant solidification and high-speed printing. This is a solution that […]

Cummins becomes first company to adopt GE Additive’s 3D metal printing technology

Cummins Inc. (NYSE: CMI) is adding to its additive manufacturing capabilities by investing in a new, high-precision 3D metal printing technology called binder jet. This investment is just the next step in Cummins’ plan to revolutionize its manufacturing processes and […]

GE Research develops super-compact Heat Exchanger using 3D printing

GE Research is leading a $2.5 MM project through the Advanced Research Projects Agency’s (ARPA-E) High Intensity Thermal Exchange through Materials and Manufacturing Processes program (HITEMMP) to develop a high temperature, high pressure and super-compact heat exchanger enabled by additive […] introduces online 3D printing course for exclusive members, a UK-based filament maker, has opened an online 3D printing course, the Institute of 3D Printing, exclusive to its members. According to, “If the course delivers all it promises, the 3D printing industry edges that little bit closer to the […]

HRL Laboratories receives Aluminum Association registration for 3D printed alloys

Research center HRL Laboratories has announced the commercialization of its 3D printed high-strength aluminum. The aluminum material has also received the first ever registration of an additive alloy from the Aluminum Association, which oversees alloy registration and product standards throughout industry. HRL […]

Researchers at Tel Aviv University 3D print heart with human tissue and vessels

Israeli scientists have 3D printed a heart with human tissue and vessels, marking it a first and a “major medical breakthrough.” The heart produced by researchers at Tel Aviv University is about the size of a rabbit’s and it marked […]

Zenith Tecnica joins forces with HPSNZ to provide female athletes with 3D printed training prosthetics

Zenith Tecnica, the only company in New Zealand harnessing EBM technology to supply and manufacture 3D printed titanium components, has revealed their recent collaboration with High Performance Sport New Zealand (HPSNZ). A supplier to Formula 1 teams, America’s Cup Regatta […]

Sandvik produces unbreakable guitar using 3D printing

Swedish engineering company, Sandvik, has built a guitar so strong that no matter how much I fancy myself a wannabe Joan Jett, is virtually impossible to break. The guitar, believed to be a world-first, is a collaborative project from a number […]

SBI Produktion launches new Metallic 3D Printer, M3DP

SBI Produktion, an Austrian welding systems manufacturer, has released the Metallic 3D Printer (M3DP), a machine that uses a plasma arc to 3D print metal parts. Founded in 1999, SBI started as a manufacturer of thickness control systems for the […]

GE Additive installs Spectra H metal 3D printers at Avio Aero plant in Cameri

First 3D printing was for single parts, then it became for short batches of 10, 100, 500 and thousands of parts. With the arrival of HP and planar technologies, we’ve started to refer to as short batches production runs of […]

Renishaw and Egan Dental partner to develop 3D printed chrome dentures

UK-based metal AM company Renishaw collaborated with a Yorkshire dental laboratory to fully digitize the design and production of removable partial dentures (RPDs). Through the collaboration and the implementation of Renishaw’s metal 3D printing platform, the dental lab is achieving faster turnaround […]

Metallum3D receives funding from CIT GAP Funds to boost the accessibility of cost effective metal 3D printing

The Center for Innovative Technology (CIT) recently announced that CIT GAP Funds has invested in Charlottesville, Va. company Metallum3D, developer of a web-based, metal 3D printing platform that provides accessible and affordable metal three-dimensional (3D) printing materials and services. Founded in […]

3D Systems On Demand inaugurates Advanced AM Center in Italy

The small, industrial town of Pinerolo, Italy, just outside of Turin, has represented a stronghold for 3D Systems’ activities in Italy since the company acquired, Provel, a large local 3D printing service provider active since the mid-1990s. The facility continued to provide […]

Swansea University sets to expand its childrens 3D printing project

The Factory of the Future project, led by Swansea University, introducing children to ‘smart manufacturing’ will be rolled out to schools across the world if it wins its bid for a grant worth over £1.2 million. “It’s vitally important to introduce our schoolchildren to […]

30 Years of EOS: Moving Ahead With Passion for Industrial 3D Printing

With an installed base of nearly 3,500 industrial 3D printing systems, the German family-owned enterprise EOS is the world’s leading supplier of systems for additive manufacturing (AM) solutions. Its path to success is characterized by a pioneering spirit, courage, and […]

Air New Zealand installs 3D printed part on Boeing 777-300ER

Air New Zealand, Microsoft, US-based supplier of aerospace parts Moog and ST Engineering from Singapore, joined together to install a 3D printed part on a Boeing 777-300ER, a wide-body commercial jet. Hinting at the future of supply chain in the aerospace industry, Carrie Hurihanganui, Air […]

AREVO 3D prints carbon fiber unibody eBike frame

AREVO, a Silicon Valley company specializing in composite 3D printing, made headlines last year for 3D printing what it called the “world’s first true 3D printed commuter bike.” The use case, undertaken in partnership with Studio West, demonstrated AREVO’s ability […]

SAMA lends their support as Association Partner to AMTech.

Shanghai Additive Manufacturing Association (SAMA) will be lending their support as Association partner for AMTech. This is a first step taken by both Indian 3D Printing Network (I3DPn) and SAMA to foster growth and networking between the Additive Manufacturing ecosystem […]

SLM Solutions appoints new CEO, received new investment to focus on growth

SLM Solutions Group AB, the Luebeck based manufacturer of Metal Powder Bed Fusion systems has announced changes in composition of their supervisory board, a new CEO and a fresh infusion of approximately EUR 13 million to strengthen its financial position and focus […]

Additive Manufacturing Technology Improves Tool and Mold making

Companies from the tool, pattern and mold making industry will be heading to Stuttgart from May 21–24 for the international Moulding Expo trade fair – and TRUMPF will be on hand to show them how to make the most of […]

Diehl Aviation delivers largest 3D-printed part for passenger aircraft

The cabin and avionics specialist Diehl Aviation delivers the largest, fully 3D-printed part for passenger aircraft to date which is installed on an A350 XWB. The module, made using the FDM* procedure, is a Curtain Comfort Header – a complex […]

MakerBot introduces new 3D printing certification program for students

MakerBot, a global leader in 3D printing, bridges the 3D printing skills gap with the launch of the MakerBot Certification™ Program for Students. This certification program gives middle school and high school students a proven edge with hands-on design thinking and […]

3D printer manufacturer inaugurates new headquarters in Dublin

Industrial 3D printer manufacturer Markforged is opening its first European headquarters in Dublin, creating 100 new jobs over the next three years. The move is part of the Boston-based company’s global expansion this year. The new roles will be mainly sales, marketing […]

Biogelx unveils commercial synthetic bioinks for bioprinting

Biogelx recently announced the launch and commercial availability of its first synthetic bioink product range. The Biogelx™-INKs have the company’s core self-assembling peptide technology but have been developed with printability in mind. Like the company’s hydrogel products, Biogelx™-INKs form a nanofibrous network, […]

WIN Automation, the industrial automation business of Wipro Infrastructure Engineering acquires Incite Cam Centre

WIN Automation, the industrial automation business of Wipro Infrastructure Engineering, has acquired Bengaluru-based Incite Cam Centre’s Automation Business. This will enhance WIN Automation’s capabilities to offer integrated and end-to-end automation solutions. WIN Automation will be able to address turnkey physical […]

Formlabs introduces two new Low Force Stereolithography 3D printing systems

Formlabs, the designer and manufacturer of powerful and accessible 3D printing systems, has recently announced the addition of two new advanced professional Low Force Stereolithography (LFS) 3D printers to its hardware lineup: Form 3 and Form 3L. LFS 3D printing […]

UPM showcases large scale robot-based 3D printing applications at Nordic 3D Expo

UPM demonstrates large scale robot-based 3D printing applications in collaboration with ABB and Prenta at Nordic 3D Expo in Espoo Dipoli Congress Centre. Large scale granulate-based 3D printing opens new possibilities for designers and manufacturers. The robot based granulate printing […]

Indian 3D Printing Network (I3DPn) announces partnership with DailyCADCAM to drive Software focus at AMTech

Indian 3D Printing Network (I3DPn) is announcing a strategic media partnership with DailyCADCAM to drive a special Software focus at AMTech. AMTech organised by I3DPn will be held at the Bombay Exhibition Centre at Mumbai from 11-12 December 2019 and […]

Siemens partners with EDAG to accelerate industrial applications of AM

Siemens is intensifying its cooperation with the EDAG Group as a leading global independent engineering company for the automotive industry, in order to further promote industrial applications of additive manufacturing (AM) and to make engineering and production processes more efficient. […]

COBOD signs on PERI as distributor in Germany, Switzerland and Austria for 3D construction printers

Danish COBOD International is most known for having 3D printed the first fully permitted building in Europe, the BOD in Copenhagen. COBOD is now accelerating and fuelling the inroads into the global mainstream construction market even more. Following shortly after […]

Stratasys showcases V650 Flex SLA 3D printer at AMUG Conference

Stratasys, the inventor of FDM 3D printing technology, has made its entry into SLA for the first time. In the second of two product launches from the company at this year’s Additive Manufacturing User’s Group (AMUG) Conference, the V650 Flex was […]

BigRep presents fully automated and 5G connected PRO 3D printer at AMUG 2019

BigRep, a German FDM/FFF 3D printer manufacturer, is presenting its first “fully automated and 5G connected” BigRep PRO machine at AMUG 2019 and Hannover Messe this week. IoT equipped, the large-scale PRO FDM/FFF printer is a combined effort between BigRep and Bosch Rexroth, a subsidiary of global engineering […]

Desktop Metal accelerate shipments of metal 3D printing system

Desktop Metal recently announced it has expanded production capacity of the Studio System™, the world’s first office-friendly metal 3D printing system. With expanded production capability, the company is now shipping at a rate of 550 complete systems per year, with […]

HP 3D prints over 10 million parts in one year

HP announced this week that its Multi Jet Fusion platform has been used to 3D print more than 10 million parts over the past year. HP’s MJF technology, which disrupted the 3D printing industry at its release because of its cost […]

TRUMPF showcases 3D printing and artificial intelligence solutions at INTECH

TRUMPF has taken the opportunity of its INTECH in-house trade show to present artificial intelligence (AI) solutions for the mechanical engineering industry for the very first time. As a leading provider of Industry 4.0 solutions, the high-tech company is developing […]

GH Induction introduces new website for 3D printed copper coils

GH Induction is offering 3D printed copper coils a standard service through its 3Dinductors website.   The group is presenting its exclusive and pioneering technological approach to 3D printing coils and inductors made of pure copper.  The technology is based on Electron Beam Melting […]

Authentise partners with Microsoft to integrate AM workflow tools into Microsoft Flow

Additive manufacturing (AM) process automation software developer, Authentise has announced a multi-year collaboration with Microsoft to integrate its workflow management system into Microsoft Flow. The collaboration utilises Microsoft Azure cloud computing platform to make digital automations available to AM end-users without any coding knowledge. With Flow, operators […]

Sharebot presents new metalONE 3D printer

Sharebot, an Italian-headquartered developer of desktop and professional grade 3D printers, showcased its latest system, the metalONE 3D printer at the Mecspe manufacturing trade show in Parma this week. It is a relatively small company, but it has a wide range […]

eSUN 3D printing orthopedic insoles looking for agents and franchisees, undertake insole 3D printing service

At present, most of the orthopedic insoles on the market adopt traditional manufacturing methods, and the process is cumbersome and expensive, mainly including manual manufacturing and CNC machining. Among them, the manual manufacturing is hand-polished by the orthopedics, which is […]

Wohlers Report 2019 details developments in AM worldwide

Wohlers Associates, Inc. recently announced the publication of Wohlers Report 2019, the 24th annual installment of its undisputed, industry-leading report on additive manufacturing (AM) and 3D printing. The worldwide study provides the “pulse” of the industry by reporting on growth, development, […]

RIZE introduces first all-in-one desktop industrial 3D printer

RIZE, Inc., a Boston, USA-based, next-generation additive manufacturing company, has introduced Smart Spaces for Innovation. Smart Spaces are ‘connected, interactive and intelligent environments’ and have been identified by Gartner as one of the top ten technology trends for 2019. RIZE has launched Smart […]

Copper3D joins Ultimaker Material Alliance Program

The Chilean-American company Copper3D Inc., specialized in the development of antimicrobial materials for 3D printing, has just joined the Ultimaker Material Alliance Program of the leading 3D printer manufacturer Ultimaker. Copper3D is a company that has been much talked about […]

Identify3D and SLM Solutions expands collaboration to boost security for AM workflow

After announcing their first collaboration in 2018, Identify3D and SLM Solutions have expanded their cooperation to productize their current joint developments to secure intellectual property in the additive manufacturing process chain. As SLM Solutions looks to the future of metal […]

PostProcess Technologies introduces new FORTI removal solution for additive manufacturing

PostProcess Technologies recently announced the launch of a new solution in their lineup of automated, intelligent post-printing solutions for additive manufacturing (AM). The new FORTI™ leverages PostProcess’ proven submersible technology for consistent, hands-free support structure and resin removal on 3D […]

MiiCraft introduces new 3D printers featuring 4K resolution projectors

Taiwanese DLP printer and resin manufacturer, MiiCraft, has announced the Advance/Profession series, a new line of 3D printers featuring 4K resolution projectors. MiiCraft’s latest range of 3D printers is particularly suited for precision manufacturing and are ideal for dental applications and use in the […]

Belgian Kamp C will print 2-storey building with huge State of the Art 3D construction printer from COBOD

Following the announcement a couple of weeks ago that Danish COBOD International had received an order for the largest 3D construction printer in the world from Saudi Arabia, COBOD continues to make news with their 3D Construction printing activity. COBOD […]

BCN3D raises $3M seed funding and spins off as an independent company

Born as a University research group in Barcelona, BCN3D has sold some 5,000 3D printers to date to clients such as BMW, Samsung, Louis Vuitton, Nissan, NASA, HTC, SEAT and ALBA Synchrotron, building a global network of 60 distribution partners. Now the research […]

Omni3D granted patent for Factory 2.0 FDM/FFF 3D printer

Omni3D, a Polish 3D printer and filament manufacturer, has taken steps towards more eco-friendly 3D printing. Founded in 2013, Omni3D is known for the Factory 2.0, a 500 mm (XYZ) sized industrial FDM/FFF 3D printer. Omni3D has been granted patents for two […]

Digital Artisan joins forces with JSR and Castem to develop 3D printed high heel shoes

Digital Artisan, a Japanese design lab has teamed up with chemicals company JSR Corporation, Castem, a manufacturer of precision casting parts, to create “Generative Heel – Formless” high heel shoes using 3D printing technology. Masaharu Ono, director of Digital Artisan […]

CD3D inaugurates first 3D bioprinting cluster in Europe

Polish 3D printer company CD3D has inaugurated its first open 3D bioprinting cluster in Europe. Located in Lodz, Poland, the cluster consists of 21 SKAFFOSYS bioprinter units, which will be used to pursue research and development in the biomedical arena. The new […]

Protolabs teams up with Wohlers Associates to introduce Designing for Additive Manufacturing course

Digital manufacturer Protolabs has teamed with leading additive manufacturing (AM) consultants Wohlers Associates in a joint effort to accelerate design for manufacturing knowledge around 3D printing. The two like-minded organizations are bringing decades of combined AM experience to an immersive […]

WACKER inaugurates first US based ACEO Open Print Lab

WACKER, the Munich based chemical company, has inaugurated its first U.S. based ACEO® Open Print Lab. The new facility, located at WACKER’s Silicone R&D facility in Ann Arbor, MI, is equipped with 3D printers able to process a broad range of […]