Energy
3D Printing content about Energy sector
Exploration-for-oil-and-gas-is-very-expensive-and-risky

Energy companies set out to standardize digital supply of spare parts

Some of the world’s largest energy companies have now signed an Industry Collaboration Agreement to set an industry standard for...
Unique Catalyst Designs Enabled by 3D printing

Shell Enables Unique Catalyst Designs With Additive Manufacturing

A catalyst is a substance that increases the speed of a chemical reaction without itself being part of the reaction....
d4d14777643c4a40918d42ff9d2d37df

Spare Parts 3D introduced its Additive Manufacturing solution to key Saudi Stakeholders during the French Fab Booster accelerator program

Spare Parts 3D (SP3D) is a French startup that helps manufacturers digitalize their spare parts inventory through additive manufacturing. They...
PDO at Adipec

Petroleum Development Oman and French Startup Spare Parts 3D Tie Up to Fast Track Additive Manufacturing

Petroleum Development Oman (PDO), the national oil company for Oman, has partnered with the French startup Spare Parts 3D (SP3D),...
3D printed clamp installed at a Shell site

Shell successfully installs the first 3D printed Leak Repair Clamp

Shell has successfully installed the first 3D printed leak repair clamp in service. Clamps, also known as mechanical leak repair...
Schematic illustration of the fabrication process of 3D printed LMBs (Image by MA Jiaxin and ZHENG Shuanghao)

Scientists Develop All-3D-Printed Lithium Metal Batteries with High Energy Density

A research team led by Prof. WU Zhong-Shuai from the Dalian Institute of Chemical Physics (DICP) of the Chinese Academy of Sciences...
GE and Shell Additive metal 3d printing

Shell and GE Additive metal 3D print oxygen hydrogen micromixer at Energy Transition Campus Amsterdam

During formnext 2022, the global additive manufacturing event, Shell International B.V. and GE Additive unveiled the results of a joint...
Subsea Repair

Shell Joins Project that Promises to Change Subsea Repair Game Using 3D Printing Tech

Oil major Shell has partnered with Kongsberg Ferrotech in a project that is developing tools to repair subsea assets using...
A thin rod of 3D-printed superalloy is drawn out of a water bath, and through an induction coil, where it is heated to temperatures that transform its microstructure, making the material more resilient. The new MIT heat treatment could be used to reinforce 3D-printed gas turbine blades.
Credits:Credit: Dominic David Peachey

MIT researchers developed a new heat treatment method that enables 3D-printed metals to withstand extreme conditions

The heat treatment technique that transforms the metals’ microscopic structure may enable energy-efficient 3D printing of blades for gas turbines...
Seurat's pulsed laser amplifier enables our industrial systems to manufacture at the fastest speeds in the 3D metal printing industry which enables highly competitive unit economics. Seurat's 2nd generation system will manufacture products at $150/kilogram.

Seurat Technologies Announces Customer Demand for 25 Tons of 3D Printed Metal Parts, Exceeding Factory Capacity

Seurat Technologies – the 3D metal printing leader making manufacturing better for people and the planet – today, announced three...
Customer-Experience-Centre-8_tcm89-11160_w504

Ricoh Customer Experience Centre in the UK expands, as the company looks to put an emphasis on co-creation

Ricoh Company, Ltd. will expand its Customer Experience Centre (CEC) in Telford, the UK, on November 7 to accelerate co-creation...
Stratasys Fortus 450mc

Kimya invests in two Stratasys Fortus 450MC 3D printers to bolster in-house materials development programme

France-baed Kimya, an ARMOR Group company, has reinforced its collaboration with Stratasys with the purchase of two FDM technology-based Fortus 450mc 3D printers. The industrial additive...
Researchers at UNSW Sydney used a standard 3D printer to produce an intricate map of Australia made of solid polymer electrolyte which was then tested as an energy storage device. Photos from Dr Nathaniel Corrigan

UNSW Sydney Researchers develop new 3D printing process that offers novel energy storage design options

A team from University of New South Wales (UNSW) Sydney has developed a way to 3D print strong, high-conducting solid...
3d printed clean energy reactors

Cornell University, Lithoz America and Dimensional Energy win $50,000 FuzeHub grant to 3D print clean energy reactors

Splitting carbon dioxide’s notoriously strong molecular bonds is no easy task, but a new grant is bringing together a Cornell...
biggest_oil_and_gas_companies

API published the 1st edition of Standard 20S for additive manufacturing of polymer-based components for the natural gas and oil industry

The American Petroleum Institute (API) today published a new standard on additive manufacturing (3D printing) for polymer-based components used in...
2021-02-26-AML3D®-Impeller-Welding

AML3D awarded world’s first AM facility accreditation

AML3D Limited (ASX:AL3) (AML3D or the Company) is pleased to announce it has been awarded the first Additive Manufacturing Facility...
eybYJyO7Mz7LpNdTkZRQJ9E0ViP1gnxGtL5qLbMl

Angus 3D Solutions investing £165k+ in new people, equipment & premises to enable growth

Scottish prototyping and 3D-printing company Angus 3D Solutions is investing more than £165,000 in new people, equipment and bigger premises to enable...
Peekay Group inaugurates 3D Printing Facility at Bengaluru Airport City

Peekay Group inaugurates 3D Printing Facility at Bengaluru Airport City

Mr.P.K.Ahammed, Chairman of Peekay Group has inaugurated the 3D Printing Facility of Peekay Steels at Bengaluru Airport City in a...
newsimage

EU project InShaPe – Next innovation leap in metal-based additive manufacturing

The research and innovation project InShaPe, funded by the EU with EUR 6.8 million, aims to make a decisive contribution...
Key Industry stakeholders to converge at regions first Metal Additive Manufacturing Symposium

Key Industry stakeholders to converge at regions first Metal Additive Manufacturing Symposium

The Metal Additive Manufacturing Symposium (MAMS) to be hosted in Bengaluru on the 27-28th July 2022 at the Taj Vivanta...
FTI AM to support ADNOC Group to expand digitalization through Additive Manufacturing

FTI AM completes ADNOC Registration – Set to Lead Digitalization and Innovation in UAE through Additive Manufacturing

The UAE-based additive manufacturing company supports ADNOC Group to expand digitalization across its range of assets. Falcon Technologies International LLC...
AML3D will use its WAM technology to manufacture components for the energy company (Courtesy AML3D)

AML3D to produce AM parts for leading Australian energy company

AML3D Limited, Edinburgh, Australia, has become an approved supplier of additively manufactured metal components to a leading Australian energy company....
AM Chronicle Middle East Outreach: Polymer AM Opportunities in Oil & Gas

AM Chronicle Middle East Outreach: Polymer AM Opportunities in Oil & Gas

AM Chronicle launches the Middle East Outreach series with a session on Polymer AM Opportunities in Oil & Gas Additive...
Falcon Technologies International LLC prequalified by ADNOC Group to offer industrial Additive Manufacturing services

Falcon Technologies International LLC prequalified by ADNOC Group to offer industrial Additive Manufacturing services

Falcon Technologies International LLC is now prequalified by ADNOC Group to offer industrial 3D Printing / Additive Manufacturing services.  Falcon...